Text version of the page

Product Advantages ? Rapid curing at room temperature. No heat required. Most bonds formed in under a minute. ? Bonds with only contact pressure. No clamping or fixturing required ? Bonds well to a wide variety of substrates including metals, rubbers, most plastics and ceramics. ? Excellent wetting action with no solvent evaporation or hazardous vapor emission. ? High strength bonds. Tensile strengths up to 4,000 psi. ? Good resistance to weathering.

Master Bond -- MB Series Cyanoacrylates - 17407 Technical Data Sheet

? Resists many chemicals including gasoline, kerosene & various oils. ? Easily applied. Spreads evenly and smoothly. No mixing required.

MASTER BOND MB SERIES CYANOACRYLATES

Product Properties ? High Strength, Rapid Curing Cyanoacrylate Adhesives for Reliable Cost Effective Bonding Product Description Most surfaces require no special pretreatments. ? Ideal for high speed production. Automatic dispensing equipment readily available. Basic physical and chemical properties of Master Bond cyanoacrylate adhesives are summarized in table #1. Aside from the properties mentioned it should be noted that ethyl type cyanoacrylates are dissolved by acetone, methyl ethyl ketone, nitromethane and dimethylformamide. Methyl types are dissolved only by strong polar solvents such as nitromethane and also dimethylformamide. Table #2 summarizes cyanoacrylate bond strengths to a variety of similar and dissimilar substrates. Additionally, information on typical chemical resistance properties is also included. All Master Bond cyanoacrylates form colorless and transparent bonds. ? Cost effective. Only minimal amounts of adhesive are needed to form strong bonds. Master Bond cyanoacrylate adhesives are high strength, rapid curing, one component systems which offer ultra-fast bonding at room temperature with no mixing or heating required. Only contact pressure is needed after application of the adhesive. They generally bond from within a few seconds to just under a minute, depending on atmospheric humidity and the substrates being bonded. Cyanoacrylates adhere well to many substrates including metals, rubbers, most plastics and ceramics. The bonds produced offer exceptional performance characteristics including resistance to most types of environmental exposures, moderate heat, aging and many different chemicals, as well as high strength and fatigue resistance. Master Bond cyanoacrylates offer versatility, strength, speed of cure as well as cost effectiveness both for production and repair applications. Master Bond offers methyl, ethyl and various specialty grades of cyanoacrylate adhesives. The methyl grades are recommended for optimal performance on metal-to-metal applications. The ethyl grades offer excellent bonding with rubbers, most plastics and also rubber or plastic to metal applications. Included among the specialty types are medical grades (biocompatible), flexibilized systems, gels and low odor (methoxymethyl) cyanoacrylates. Master Bond cyanoacrylate adhesives are attractive not only technically but economically. The best quality bonds are usually obtained by using the minimum quantity of adhesive needed to fill the joint. The thinner the adhesive film, the faster the cure and the stronger the bond. Depending on the size of the bond, one ounce of adhesive properly used can provide enough material for as many as 2000 bonds. ? Meets MIL-A-46050B specification: ? Meets MIL-A-46050C specification: Type I, class 1— MB300, MB301, MB325 Type I, class 1 — MB303, MB320, MB325 Type I, class 2 — MB302, MB303 Type II, class 1 — MB300 Type II, class 2 — MB301, MB302 Type II, class 3 — MB295, MB297 Type IA and IIA — Master Bond Accelerator for Cyanoacrylate Adhesives.