Text version of the page

MASTER BOND MASTERSIL APPLICATION SELECTOR GUIDE

Selected Silicone Adhesives, Sealants & Potting Compounds Partial Listing Only –— Other Grades Available One Component Series —

MasterSil Tensile Volume Service Product Viscosity Strength Elongation Hardness Resistivity Set-Up Time Cure Schedule Temp Grade Color cps psi, 75°F %, 75°F Shore A ohm/cm Minutes, RT Temp/Time, °F Range, °F Applications 410 translucent & selected colors paste 400 500 30 1x10
15 10-15 12-24 hrs @ RT -75 to +400 General purpose type, non-flowable adhesive/sealant. Excellent electrical and adhesive properties. Good weatherability and water resistance.* 415 transparent paste 325 375 30 1x10
14 8-12 12-24 hrs @ RT -185 to +400 Fast setting, optically clear system for bonding and sealing. Superb light transmission. Superior flexibility at lower temperatures. 700 black paste 300 400 25 1x10
15 20-30 24-48 hrs @ RT -75 to +400 General purpose system for bonding & sealing. Often used for formed-in-place gasketing applications.* 701 translucent paste 300 400 20 1x10
15 20-25 24-48 hrs @ RT -75 to +400 Superior, high performance system for bonding & sealing Excellent water resistance & weatherability.* 702 translucent, gray or black paste 750 620 33 1x10
15 15-20 24-48 hrs @ RT -75 to +450 Non-corrosive. For general purpose bonding, sealing and formed-in-place gasketing. Excellent electrical properties. Superior heat resistance. ** 705 translucent white or black self leveling paste 220 225 20 1x10
15 20-25 24-48 hrs @ RT -75 to +400 Non-corrosive, self leveling paste for bonding, sealing and protective coatings. Food grade certifiable. Excellent dielectrics over a wide temperature range. ** 705TC white paste 210 70 50 1x10
14 5-8 24-36 hrs @ RT -75 to +400 Thermally conductive (15 BTU•in/ft
2 •hr•°F at 75°F), electrically isolating adhesive & sealant. Bonds well to a wide variety of substrates. 711 translucent paste 400 400 30 1x10
15 3-5 8-12 hrs @ RT -75 to +400 Exceptionally fast setting, high performance system. Non-corrosive. Widely used in manufacturing & repair. 713 translucent 3,000 125 210 25 1x10
15 6-8 12-18 hrs @ RT -75 to +400 Very low viscosity, non-corrosive and fast curing. For coating and encapsulating circuit assemblies and electronic components. Excellent shock resistance. 717FS red paste 760 240 40 2x10
13 30-40 36-72 hrs @ RT -75 to +500 High strength adhesive/sealant featuring extraordinary resistance to oils, fuels and solvents. Widely used for sealing military aircraft fuel tanks. 773 transparent 60-70 50 40-45 30 1x10
14 5 2-4 hrs @ RT -75 to +400 Ultra low viscosity conformal coating material. Easily applied by spraying, brushing, dipping or flow coating. Superb humidity and heat resistance. 800 black 45,000 250 260 26 2x10
13 20-25 24-48 hrs @ RT -75 to +600 Exceptionally heat resistant system. Serviceable up to 600°F. Non-corrosive. Flowable. Used to encapsulate & protect electronics and heating elements. 801 black paste 360 300 40 1x10
14 15-20 24-48 hrs @ RT -75 to +600 Paste version of MasterSil 800. Can be used for vertical applications. Widely used for aerospace sealing and gasketing. Also non-corrosive. 803 translucent paste 650 300 50 1x10
15 30-40 72-96 hrs @ RT -180 to +500 Unique, non-corrosive system featuring enhanced low and high temperature serviceability.

* MIL A 46106, ** MIL A 46146 Available in tubes & cartridges, pint, quart, gallon & 5 gallon pails & 55 gallon drums