Text version of the page

MASTER BOND ANAEROBIC APPLICATION SELECTOR GUIDE

Anaerobic Systems for Retaining & Sealing Bolts, Nuts, Screws, Studs, Bearings, Bushings, Seals, Keys & Splines. INDUSTRIAL GRADES

Master Locking Torque Bond 3/8” Bolts, Viscosity Color Cure Service Temp Grade In - #’s CP Code Time Typical Gap Filled Range, °F Applications GP2 130 20,000+ thixotropic Red greater than 2 hours 0.020” -65 to +350 “no drip”; strong; locking, bonding and sealing; seal vertical flanges. GP22 55 20,000+ thixotropic Red greater than 2 hours 0.020” -65 to +350 “no drip”; medium strength; locking, bonding and sealing; pipe sealant. GP222 30 20,000+ thixotropic Red greater than 2 hours 0.020” -65 to +350 “no drip”; for quick disassembly; for locking, bonding and sealing. GP122 40 900 Purple greater than 2 hours 0.010” -65 to +350 mild strength; locking, bonding and sealing; for ready disassembly. GP144 80 1,100 Blue less than 1 hours 0.012” -65 to +350 medium strength; locking, bonding and sealing; retaining bearings, bushings. GP166 190 1,500 Red 1 - 2 hours 0.012” -65 to +350 high strength; locking, bonding and sealing; retaining bearings, seals, bushings GP555 210 700 Red 1 - 2 hours 0.010” -65 to +350 locking and retaining studs, nuts, screws; sleeves, bushings and cylindrical parts retained. GP575 220 7,000 Red 1 - 2 hours 0.015” -65 to +350 high strength cures for larger clearances; seal flanged assemblies. GP595 245 20 Green less than 1 hours 0.005” -65 to +350 very fast high strength cures, wicking grade, also a weld sealant. GP666 284 125 Green less than 1 hours 0.005” -65 to +350 retaining compound; locking, sealing and bonding assemblies. GP55 210 550 Green greater than 2 hours 0.010” -65 to +350 retaining bearings, shafts and hubs; good temperature resistance. GP50 295 2,000 Green greater than 2 hours 0.015” -65 to +350 high strength retaining compound, permanent assemblies.

Strengths and cure time measured with unprimed clean 3/8 - 24 carbon steel fasteners. Strengths reported after 24 hour cure at room temperature in accordance with MIL-S-22473D.

Master Bond Inc.

Adhesives, Sealants & Coatings • 154 Hobart Street • Hackensack, N.J. 07601 • Tel: 201-343-8983 • Fax: 201-343-2132

Notice:
Master Bond believes the information on the data sheets is reliable and accurate as is technical advice provided by the company. Master Bond makes no warranties (expressed or implied) regarding the accuracy of the information and assumes no liability regarding the handling and usage of this product. D019