Marsh Bellofram Diversified Electronics Division ETN Series Solid State Flasher - Marsh Bellofram - #1

Text version of the page

800.727.5646 atcdiversified.com Diversified Electronics ETN Time Delay Relays // ETN Series 59 S o l i d- S t a t e F l a s h er When supply voltage is applied, the OFF delay (T1) begins. Upon completion of the OFF delay, the load energizes and the ON delay (T2) begins. Upon completion of the ON delay, the load de-energizes and one cycle is complete. This ON/OFF cycling continues until the supply voltage is removed. The OFF delay always equals the ON delay. • Totally Solid-state • 2-Wire Leads (Series Connection with Load) • Totally Encapsulated Circuitry • Molded Case with Built-In Mounting Feature • High Inrush Capability • Low Cost • 1 Amp (Fullwave) and 3 Amp (halfwave) versions MODEL NUMBER >>>>>> ETN 120 F T 75 Voltage 120 A F T 75 120 Volts Type of Voltage AC Voltage 3 Amp Halfwave H Type of Operation Fixed Unit Enclosure Enclosure Type FLASHING RATE 75 Flashes/minute (Standard) Contact factory for other flashing rates \\\OPERATION \\\SPECIFICATIONS TIMING ACTION Flasher, 50% Duty Cycle TIMING RANGE Factory Fixed, (45-150) Flashes per minute ±20% OUTPUT RATING (SOLID STATE) 1 A Resistive (Fullwave) 10 A Maximum (Inrush) 40 mA Minimum (Hold in Current) 2.5 Volt Drop @ 1 A 3 A Resistive (Halfwave) 10 A Maximum (Inrush) 40mA Minimum (Hold in Current) 1.1 Volt Drop @ 3 Amp SUPPLY VOLTAGE 120 VAC; ± 15%, 50/60 TERMINATIONS (2) 6 inch wires, 18 AWG, 300 Volt TEMPERATURE RATING Operate -4° to 140°F (-20° to +60°C) Free Air Storage -40° to 185°F (-40° to +85°C) MOUNTING No. 8 or No. 10 Screw ENCLOSURE Polycarbonate Case, Totally Encapsulated for Environmental Protection WEIGHT 0.1 lbs. \\\DIMENSIONS (INCHES)