Text version of the page

esil EB esil EB Dur Dur Duresil EB

Epoxy modified paintwith hydrocarbon resins for anti-acid protection of concrete and steel surfaces

Duresil EB film is designed for contactwith sewage and can be used for the protection ofsewage treatment tanks and sewer mains. WHERE TO USE For the protection of sewage treatment plants, cisternsand concrete sewer pipes in contact with aggressivechemicals such as acids, alkalis, hydrocarbons,detergents and sewage. Duresil EB is also resistant to frost and sunlight, andcreates a vapour barrier. Some application examples • Anti-acid protection of sewage treatment tanks.• Anti-acid protection of sewer mains.• Coating of recycling tanks for oils and hydrocarbons. • Reserve tanks. • Safety reserve tanks. • Drain wells.• Anti-corrosive coating of sandblasted steel surfaces.• Protection of reinforced concrete and steel exposed to salt air. RECOMMENDATIONS • Do not use Duresil EB on damp surfaces.• Do not dilute Duresil EB with water. For sprayapplications, nitrosolvent or white spirits may be usedas needed.• Do not use Duresil EB when rain threatens.• Do not use Duresil EB at temperatures below +5°C.• Do not use Duresil EB on friable, damp or dustysubstrates.• Do not use Duresil EB on substrates subject to risingdamp (consult MAPEI’s Technical Service);• Do not use for surfaces in contact with drinking water(use TECHNICAL CHARACTERISTICS Duresil EB is a two-component epoxy modified paintbased on hydrocarbon resins and special additivesmanufactured to a formula developed in the MAPEI Research and Development Laboratories.Once it hardens completely, Mapecoat I24 ). APPLICATION PROCEDURESubstrate preparation Duresil EB is resistant toacids, alkalis, salts, oils, and hydrocarbons, as shown in Table 1. The hardened Substrates must be thoroughly clean, solid, and dry. Completely remove loose materials, dust, traces offormwork, release agents, paints and varnishes bysandblasting.
[sche3]322 Inglese(DURESILEB)(25.05.2005 - 5ª Bozza/Ciano Digitale/Pell.)