MarForm
Probe T2W
T2W probe with probe arm moveable around 180° Measuring range ± 1,000 µm (.039 in)Measuring force adjustable from 0.05 to 0.5 N (.01 to .1 lbf)Measuring direction switchableExchangeable probe armMechanical overload protectionFree travel limitation can be adjusted in contacting directionClamping shaft dia. 8 mm (.31 in) The inductive T2W probe is a universal device. The fact that theprobe arm can be moved in a range of 180° and that there are a
variety of clamping possibilities for the probe means that measure-
ments can also be performed on difficult to access areas. You can
combine easily exchangeable probe arms with a variety of styli in
order to adapt the probe to the relevant measuring tasks or work-
pieces. Measuring station MMQ 100 Order no. 9999115Measuring station MMQ 100 Advanced Order no. 9999116Optional touchscreen monitor Order no. 9999540Roundness measuring device, C-axis Roundness deviation (µm+µm/mm measuring height)** 0.05 + 0.0006Roundness deviation (µm+µm/mm measuring height)* 0.025 +0.0003
Axial run-out deviation (µm+µm/mm measuring radius)** 0.04 + 0.0006Axial run-out deviation (µm+µm/mm measuring radius)* 0.020 +0.0003 Centering and
tilting table Manual rough and fine adjustmentTable diameter 160 mm (6.30 in)
Table load capacity, centric 200 N (44.96 lbf)Rotational speed (rpm) 50 Hz / 60 Hz 5 / 6 Vertical unit, Z-axis
Formtester MMQ 100. Technical Data
Positioning path 300 mm (11.81 in)Positioning manual Horizontal unit, X-axis Positioning path180 mm (7.09 in)Positioning manual Measuring volume Test diameter up to 375 mm (14.76 in)
Measuring height up to 470 mm (18.50 in)Distance C-/Z-axis190 mm (7.48 in) Dimensions, weight Length470 mm (18.50 in)Width 300 mm (11.81 in)Height 545 mm (21.46 in)Weight approx.28 kg (61.73 lbs) Connection data Mains voltage (V/Hz-VA) 230 (115) / 50 (60)-20
NEW. MarForm MMQ 100 with EasyForm Form measurement made easy!
Test the quality of your products in the production environ-ment. Despite the fact that the benefits of monitoring quality in the man-ufacturing environment have been recognized by many companies, a largenumber of businesses have until now been reluctant to implement form
testing at the production machine. The instruments required for this are too
expensive, too sensitive and too complicated to operate. Simpler devices
do not offer the required evaluation and documentation options.Therefore, either the slow process of sending products to the precisioninspection room must be accepted or, to be on the safe side, production is
made more accurate and thus more expensive. The high-precision, robust
and easy-to-use MMQ 100 represents the solution to this problem.
*Values as max. deviation from reference circle LSC at 20 °C ± 1 °C (68 °F ± 1 K) in anti-vibration environment, professional filter 15 upr, 5 rpm and standard probe arm with ball dia. 3 mm.**All values to DIN ISO 1101 at 20 °C ± 1 °C (68 °F ± 1 K) in anti-vibration environment, filter 15 upr LSC, 5 rpm and standard probe arm with ball dia. 3 mm.Tested on standard, using error separation methods. Mahr GmbH Göttingen
© by Mahr GmbH, GöttingenWe reserve the right to make changes to our products, especially due
to technical improvements and further developments.
All illustrations and technical data are therefore without guarantee. Postfach 1853, D-37008 Göttingen; Brauweg 38, D-37073 Göttingen;
Phone: +495 51-707 30, Fax +49 551-710 21; E-mail: info@mahr.com 3758513-09.05.2005