Torque/Speed Conditioner TSC 401 - MAGTROL - #1

Text version of the page

TSC 401 Data Sheet TSC 401 Torque/Speed Conditioner www.magtrol.com MAGTROL TSC 401 with connecting cables for WB/PB Dynamometer and DSP6001 DESCRIPTION The TSC 401 is the Torque/Speed Conditioner used to connect Magtrol Eddy-Current (WB) or Powder (PB) Dynamometers to the DSP6001 Controller. Powered by the DSP6001, and based on a precision instrumentation amplifier, the unit amplifies and filters the torque signal. It also provides power supply and connections for the speed pickup sensor which is located in the dynamometer. SAMPLE CONFIGURATION Ordering Information It is important to specify which dynamometer will be used with the TSC 401 Torque/Speed Conditioner so that it can be delivered with the appropriate cables. Because The TSC 401 also requires calibration with its associated dynamometer, it is suggested that the dynamometer and Torque/Speed Conditioner be ordered together in order for Magtrol to perform this calibration before leaving the factory. If purchased separately, the part number and serial number of the customer’s dynamometer must be specified so that Magtrol can ship a pre-configured TSC 401. The customer must then perform the (Zero, CW & CCW) calibration on site, as outlined in the TSC 401 User’s Manual. Dynamometer Torque/Speed Conditioner P/N WB/PB 2.7, 43 234-401-000-11x WB/PB 65, 115, 15 234-401-000-12x Eddy-Current (WB) OR Powder Brake (PB) Dynamometer Excitation Torque Speed TSC 401 Torque-Speed Conditioner DES 31X POWER SUPPLY GPIB RS-232 or PC M-TEST DSP6001 Dynamometer Controller