RT 100 Series | Reaction Torque Sensor
4Pages

{{requestButtons}}

Catalog excerpts

RT 100 Series | Reaction Torque Sensor - 1

REACTION TORQUE SENSORS FEATURES ▪ Torque Range: 200 N·m ... 100 kN·m (or more) ▪ High accuracy 0.05 % ... 0.2 % ▪ Overload capacity: up to 200 % ▪ Compact and robust ▪ High torsional stiffness ▪ Protection class: IP 65 ▪ Center through hole ▪ Specific design available on request Fig. 1: RT 114 | Reaction Torque Sensor DESCRIPTION With its compact, robust and maintenance-free design, the Magtrol RT  100 Series Reaction Torque Sensor has many favorable features. Based on strain-gauge technology, the RT Sensor provides highly accurate signal transmission. The RT 100 Series Torque Sensor has been designed to perform static torque measurement and dynamic rotation (with limited angle) in both clockwise and counterclockwise direction with high precision. The sensor measures small-reaction torque levels using flange-to-flange connections in-line with the component under test. Its design with a center through hole allows the pass through of a shaft, cables or pipes. Main field applications include actuator and valve testing, fastener testing, pump testing and automotive braking. SYSTEM CONFIGURATION PSD PORTABLE SENSOR DISPLAY LOAD MONITORING UNIT LMU 209 DATA ENTER Reaction Torque Sensor Load Monitor Unit Load Monitor Signal Conditioner / Display PSD Portable Sensor Display © 2021 MAGTROL | Nos produits sont en constant développement; Magtrol se réserve le droit de modifier les spécifications sans préavis. FICHE TECHNIQUE Customer Measuring Amplifier (not provided

Open the catalog to page 1
RT 100 Series | Reaction Torque Sensor - 2

RT-100 SERIES SPECIFICATIONS TORQUE RATINGS MODEL MAX AXIAL MAX LATERAL TORSIONAL STATIC RATED COMBINED ERROR OVERLOAD MAX. STATIC BENDING TORQUE TORQUE (RT) (Linearity + Hysteresis) CAPACITY TORQUE MOMENT MAX LOAD (AL) a) LOAD (LL) a) STIFNESS OUTPUT SIGNAL N·m MECHANICAL CHARACTERISTICS Material Stainless Steel ENVIRONMENT Nominal temperature range Service temperature range Reference temperature Temperature influence on zero Temperature influence on sensitivity Protection class INPUT AND OUTPUT SIGNALS Input resistance Insulation resistance Power supply Torque output signal b,c) See below...

Open the catalog to page 2
RT 100 Series | Reaction Torque Sensor - 3

NOTE:All values are in metric units. Dimensions are in millimeters Fixing screws Screwing torque a) Property class of the screws, according to the standard ISO 898-1 : Property Classes 10.9 NOTE:All values are in metric units. Dimensions are in millimeters Fixing screws Screwing torque a) Property class of the screws, according to the standard ISO 898-1 : Property Classes 12.9 © 2021 MAGTROL | Nos produits sont en constant développement; Magtrol se réserve le droit de modifier les spécifi

Open the catalog to page 3
RT 100 Series | Reaction Torque Sensor - 4

RT-100 SERIES SYSTEM OPTIONS AND ACCESSORIES LMU 209 - LOAD MONITORING UNIT For dynamic measurement, MAGTROL recommends the LMU 209 Load Monitoring Unit, which offers a passband up to 3  kHz, which allows the measurement of high dynamic torque peak. The LMU  209 is a versa- Fig. 2: LMU 209 | Load Monitor- tile strain gauge amplifier, ing Unit (Polycarbonate designed for signal conditionhousing for DIN-rail ing and interfacing low level mount) signals to programmable logic controllers (PLCs) or any control unit with analog inputs. The LMU 209 features both voltage and current-type outputs....

Open the catalog to page 4

All MAGTROL catalogs and technical brochures

  1. 4 QUADRANT

    2 Pages

  2. ZM Series

    5 Pages

  3. SK-01 Series

    3 Pages

  4. AMF Series

    3 Pages

  5. WB23 & WB27

    7 Pages

  6. Model 5200

    1 Pages

  7. 5211

    1 Pages

  8. 5251-2

    1 Pages

  9. SBB 14

    3 Pages

  10. FMF SERIES

    5 Pages

  11. ZS Series

    7 Pages

  12. RSB

    1 Pages

  13. PC-150

    2 Pages

  14. PCB

    1 Pages

  15. CST 113

    4 Pages

Archived catalogs

  1. WB/PB 65

    8 Pages

  2. WB/PB 15

    8 Pages