Catalogs >
MAGTROL >
MB-02 Series | Miniature Load Measuring Pins

MB-02 Series | Miniature Load Measuring Pins
3Pages

Catalog excerpts

MB-02 Series | Miniature Load Measuring Pins - 1

MINIATURE LOAD MEASURING PINS FEATURES ▪ Overload detection and load measurement from 1 kN to 12 kN ▪ Admissible overload: 150 % of the nominal load ▪ High overload capacity ▪ Standard diameter available from ø10 mm ▪ Small size for compact applications ▪ Strain gauges full bridge technology ▪ High reliability for strict safety requirements ▪ Special high strength steel ▪ Ideal for use in hostile environments ▪ Protection class IP 66 ▪ Can be designed with special dimensions for adaptation to various construction conditions. Magtrol Miniature Load Measuring Pins are used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s MB-02 Series Miniature Load Pins are rugged with high resistance stainless steel and tight construction, designed specifically for use in harsh industrial environments. The compact design as well as the high protection class give this sensor an excellent aptitude for the measurement and monitoring of forces and overloads on mechanical compact applications, as well as in harsh environments. Applied load OPERATING PRINCIPLE When force is applied to the Load Measuring Pin along its sensitive axis, the effect on the strain gauge bridge results in an output signal proportional to the applied force. The powering of the strain gauge bridge, as well as the amplification of its output signal voltage, is performed by an external amplifier. Depending on the execution, the latter allows the monitoring of several levels. Fig. 2: Ra should equal Rb so that the force is evenly distributed © 2021 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.

Open the catalog to page 1

MB-02 Series | Miniature Load Measuring Pins - 2

MB-02 SERIES SPECIFICATIONS LOAD MESURING 1 kN, 2 kN, 5 kN, 10 kN or 12 kN b) Nominal Load (NL) Overload Admissible (% of NL) Non-linearity Error MECHANICAL CHARACTERISTICS Operating Principe Full-bridge strain gauge Special high strength Stainless Steel ENVIRONMENT Compensated temperature range Operating temperature range ELECTRICAL CHARACTERISTICS Nominal Sensitivity Strain Gauge Bridge Impedance: Input Strain Gauge Bridge Impedance: Output Power Supply Protection class ELECTRICAL CONNECTION Radial output Integrated PTFE K 422 cable; lenght 1.5 m with heat shrink sleeve c) Supply + Supply...

Open the catalog to page 2

MB-02 Series | Miniature Load Measuring Pins - 3

Load Direction Cable PTFE NOTE: ll values are in metric units. Dimensions are in millimeters. A Other dimensions available on request a) The models listed represent a part of our standard range. Other models (as well as customized models) are available on request. NOTE: 3D STEP files of most of our products are available on our website: www.magtrol.com ; other files are available on request. RELATED PRODUCT ORDERING INFORMATION LB & LE SERIES - LOAD MEASURING PINS Please consider the Model Number listed in the dimension table as the ordering number. LB & LE Series Load Measuring Pins are...

Open the catalog to page 3