tension control for brakes and clutches: Spyder - MAGPOWR - #1

A Maxcess

International

Company

if

Spy

der is a simple, powerful, cost-effective tension control that saves space in a

control cabinet and is easy to install. Ethernet communications allow access via a web browser or HMI for remote troubleshooting, programming and/or data collection. Spyder can be used to control clutches and brakes, interface directly with a drive in unwind, rewind or point-to-point applications, as well as provide control for dancer applications.

(from load cell or dancer position)

Load cell: 2.1 mV/V using +5 VDC and -5 VDC across one 350 ohm sensor or two 350 ohm sensors in parallel

Setpoint: 0 VDC to +10 VDC, 0.25

mADC maximum, or 1k to 10k ohm potentiometer

E-Stop, Run/Stop, Tension Off, Auto/Manual: switch closure or 5 VDC or 24 VDC active high/low logic, 8 mADC maximum Dancer Position: 1k to 10k ohm potentiometer

24 VDC, ±10%, 250 mA, 6 VA

IP-20 (IEC529)

Operating: - 0° C TO 50° C Storage: -30° C TO +80° C

0 to +10 vdc, 1 mADC maximum 4 to 20 mADC, 500 ohm maximum -10 to +10 vdc, 1 mADC maximum

0 to 1 mADC or

0 to +10 VDC analog

Ethernet, Modbus TCP, FTP Client, HTTP Web Server Interface

Web Browser File Format: html