Text version of the page

LC-500G Low Tension LC-500G Low Tension

Load Cell

LC-500G-S1LC-500G

load cell: LC-500G - 30790 A

s manufacturing capability evolves and the demands for finer wire, filamentand textile material increase, so does the need for tension control in extremely light applications. To meet this critical need MAGPOWR has developed the LC-500G, 500 gram load cell. With a full wheat-stone bridge strain gage configuration, the LC- 500G meets the same industry leading specifications as all other MAGPOWR load cells. The LC-500G also employs 360 degrees of overload protection preventing the need for recalibration in the event of overload situations. The LC-500G is designed to mount easily into almost any single strand installation. A pair of supplied jam nuts allow you to easily mount the unit into your machine frame with simple depth and orientation adjustment. The LC-500G is constructed from corrosion resistant, nickel-plated aluminum and is provided with a 1” diameter X 1/8” wide anodized aluminum pulley. For applications requiring special pulleys, the LC-500GS1 is available with provisions for a customer-supplied pulley. 0.02% of rating per ËšC Temperature Effect on Zero: .014 in. (.36 mm) maximum Deflection at Full Load:
KEY 0.2% of full scale maximum Combined Non-Linearity & Hysteresis: Repeatability:

Key Features:

0.5% of full scale maximum • Compact design is easy to install.• Easy depth, alignment adjustment.• 360Ëš Overload Protection.• Precise control in extremely lowtension applications.• Ruggedly constructed for long lifeand dependability.• Foil strain gage thermally-matchedto beam.• Full Wheatstone bridge design formeasurement accuracy.• Inch and Metric models for international installations.• Available with or without pulley.

General Specifications

350 Ohm Product Name: Gage Resistance: Excitation Voltage: LC500G - Low Tension Load Cell 10 vdc nominal Output Signal: Operating Temperature: -30 to 95º C 21 mvdc nominal at full load