Miji Lif 24 - Magnus Equipment / Power Sonics - #2

Text version of the page

MACHINE DIMENSIONS MACHINE NUMBER: 24 1X 24 1.5X 24 2X INSIDE TANK: Length A 23.50” 36.75” 49.75” Width B 33.50” 33.50” 33.50” Depth (nominal) C 30.50” 30.50” 30.50” DIPPING SPACE: Length D 22.00” 35.25” 48.25” Width E 22.00” 22.00” 22.00” Depth (See Note 1) F 18.00” 18.00” 18.00” OVERALL TANK (approx.): Length G 26.00” 39.25” 52.25” Width H 36.00” 36.00” 36.00” Height J 35.50” 35.50” 35.50” OVERALL MACHINE (approx.): Length G 26.00” 39.25” 52.25” Width (See Note 2) L 44.50” 44.50” 44.50” Height M 70.50” 70.50” 70.50” ROLLER PLATFORM: Total Length 22.00” 35.00” 48.00” SOLUTION LEVEL: Height (nominal) N 24.50” 24.50” 24.50” SERVICE CONNECTIONS ALL MACHINES (heated or unheated): Air Consumption (CFM) (See Note 2) 3-5 3-5 3-5 Air Supply (maximum PSI) (See Note 3) 125 125 125 Air Inlet (NPT) 0.375” 0.375” 0.375” Drain Valve (NPT) 1.25” 1.25” 1.25” Overflow (NPT) 1.00” 1.00” 1.00” Vapor Exhaust (diameter) 4.00” 4.00” 4.00” Water Inlet (NPT) 0.50” 0.50” 0.50” ELECTRICAL SUPPLY: 240V/1/60Hz 53A 53A 103A 240V/3/60Hz 32A 32A 61A 480V/3/60Hz 18A 18A 32A STEAM HEATED MACHINES: Inlet/Outlet (NPT) 1.00” 1.00” 1.00” BASKET DIMENSIONS (other sizes available) MACHINE NUMBER: 24 1X 24 1.5X 24 2X Length Y 20.00” 33.00” 46.00” Width X 20.00” 20.00” 20.00” Depth Z 8.00” 8.00” 8.00” GENERAL DATA Load Capacity @ 100 PSI (lbs.) (See Note 2) 150 150 150 Liquid Capacity (gal.) 85 130 170 Tank Wall Thickness (ga.) #12 #12 #12 Shipping Weight (approx. lbs.) 500 550 600 HEATING DATA (See Note 4) HOURLY FUEL CONSUMPTION FROM COLD START: Electric (kW) (See Note 5 & 6) 12 12 12 HEAT TIME FROM COLD START: Electric (hrs.) (See Note 6) 2-4 2-4 2-4 AGITATION DATA FOR ALL MACHINES (See Note 7) Short Stroke (See Note 8) 2.5-4.0” 2.5-4.0” 2.5-4.0” Long Stroke (See Note 9) In-Out In-Out In-Out STROKES (per min.): (See Note 10) Short 120-160 120-160 120-160 Long 20-30 20-30 20-30 NOTES 1. Dipping Depth (F) reduced by 6” when ultrasonics are installed. Request extra-deep tank to maintain full dipping depth. 2. 450 lb. load capacity [Overall Machine Width (L) becomes 54.50”, Air Consumption becomes 7-11 CFM]. 3. Lighter loads can operate at reduced air pressure. 4. Fuel consumption and heat up times listed are based on heating from room temperature to 180o F. 5. Fully immersed stainless steel sheathed elements on all electrically heated units. Other voltages and phases on request. 6. Contact factory for steam heated information. 7. The data shown is typical and may vary with air pressure, load weight, and shape. 8. Maximum part height is 12” - 14” for full immersion cleaning. 9. Long stroke is advantageous in flushing out blind holes in parts. 10. A stroke equals travel in one direction. 2010.Rev002