Magna Lif - Magnus Equipment / Power Sonics - #2

Text version of the page

MACHINE DIMENSIONS MACHINE NUMBER: #3 #4 #5 #5.5 INSIDE TANK: Length A 45.00” 57.00” 69.00” 87.00” Width B 43.00” 48.00” 53.00” 53.00” Depth (nominal) C 40.50” 40.50” 40.50” 40.50” DIPPING SPACE: Length D 41.00” 53.00” 65.00” 83.00” Width (See Note 1) E 24.00” 29.00” 34.00” 34.00” Depth (See Note 1) F 26.00” 26.00” 26.00” 26.00” OVERALL TANK (approx.): Length G 48.00” 60.00” 72.00” 90.00” Width H 45.50” 50.50” 55.50” 55.50” Height J 45.50” 45.50” 45.50” 45.50” OVERALL MACHINE (approx.): Length (gas heat) K 66.00” 78.00” 90.00” 108.00” Length (all others) K 54.00” 66.00” 78.00” 96.00” Width L 65.00” 70.00” 75.00” 75.00” Height M 90.00” 90.00” 90.00” 90.00” ROLLER PLATFORM: Total Length O 40.00” 52.00” 64.00” 82.00” Roller Width P 22.00” 27.00” 32.00” 32.00” SOLUTION LEVEL: Height (nominal) N 32.50” 32.50” 32.50” 32.50” SERVICE CONNECTIONS ALL MACHINES (heated or unheated): Air Supply (maximum PSI) (See Note 2) 125 125 125 125 Air Inlet (NPT) 0.50” 0.50” 0.50” 0.50” Water Inlet (NPT) 1.00” 1.00” 1.25” 1.25” Drain Valve (NPT) 2.00” 2.00” 2.00” 2.00” Overflow (NPT) 2.00” 2.00” 2.00” 2.00” Vapor Exhaust (diameter) 4.00” 4.00” 6.625” 6.625” ELECTRICAL SUPPLY: 240V/3/60Hz 61A 61A 90A 119A 480V/3/60Hz 32A 32A 47A 61A GAS HEATED MACHINES: Supply Inlet (NPT) 1.00” 1.00” 1.00” 1.00” Fume Exhaust (diameter) 4.00” 4.00” 4.00” 4.00” STEAM HEATED MACHINES: Inlet/Outlet (NPT) 1.00” 1.00” 1.00” 1.00” BASKET DIMENSIONS (inside) MACHINE NUMBER: #3 #4 #5 #5.5 Length W 33.25” 45.00” 55.25” 74.25” Width X 19.25” 23.00” 28.50” 28.50” Depth Y 12.00” 14.00” 16.00” 16.00” Overall Height Z 20.00” 20.00” 20.00” 20.00” GENERAL DATA Load Capacity @ 100 PSI (lbs.) 1000 1000 1000 1000 Liquid Capacity (gal.) 272 385 514 648 Tank Wall Thickness (ga.) #10 #10 #10 #10 Shipping Weight (approx. lbs.) 1800 2040 2600 3000 HEATING DATA (See Note 3) HOURLY FUEL CONSUMPTION FROM COLD START: Electric (kW) (See Note 4) 24 24 36 48 Natural Gas (cu. ft./hr.) 115 235 257 257 Steam (approx.) (lbs./hr.) 85 110 175 220 HEAT TIME FROM COLD START: Electric (hrs.) 4.50 4.50 4.50 4.50 Gas or Steam (hrs.) 3.50 3.50 3.50 3.50 AGITATION DATA Agitation Cycle (See Note 5) Short Medium Long Strokes (per min.) (See Note 6) 100-140 50-60 20-24 Stroke Length 5-7” 11-13” In-Out NOTES 1. With roller platform, Dipping Depth (F) is reduced by 1.50” and Width (E) is reduced by 2.00”. 2. Lighter loads can operate at reduced air pressure. 3. Fuel consumption and heat up times listed are based on heating from room temperature to 180oF. 4. All electric heaters used are stainless steel sheathed elements. Stainless steel heating coils for gas and steam heated models are optional. 5. The data shown is typical and may vary with air pressure, load weight, and shape. Air consumption 20-28 CFM (free air) with normal load on short stroke for Magna Lif MALH models. 6. A stroke equals travel in one direction. K A D F 8 N O G M C E P H J L FRONT CROSS SECTION END CROSS SECTION (CYLINDER GUARD NOT SHOWN) B 2010.Rev002