Aja Lif - Magnus Equipment / Power Sonics - #2

Text version of the page

MACHINE DIMENSIONS (See Note 1) MACHINE NUMBER: #4 #5 #6 INSIDE TANK: Length A 54.00” 66.00” 78.00” Width B 46.00” 52.00” 68.00” Depth C 42.00” 42.00” 60.00” DIPPING SPACE: Length D 52.00” 64.00” 76.00” Width E 30.00” 36.00” 52.00” Depth (See Note 2) F 26.00” 26.00” 44.00” OVERALL TANK (approx.): Length G 58.00” 70.00” 82.00” Width H 48.50” 54.50” 70.50” Height J 46.25” 46.25” 64.25” OVERALL MACHINE (approx.): Length (gas heat) K 72.25” 84.25” 110.50” Length (all others) K 64.50” 76.50” 90.00” Width L 62.50” 68.50” 90.00” Height M 92.25” 92.25” 128.00” ROLLER PLATFORM: Total Length D 51.00” 63.00” 75.00” Roller Width E 27.50” 33.50” 49.50” SOLUTION LEVEL: Height (above tank bottom) N 34.00” 34.00” 52.00” SERVICE CONNECTIONS ALL MACHINES (heated or unheated): Air Supply (maximum PSI) (See Note 3) 125 125 125 Air Inlet (NPT) 0.50” 0.50” 0.50” Water Inlet (NPT) 1.25” 1.25” 1.25” Drain Valve (NPT) 2.00” 2.00” 2.00” Overflow (NPT) 2.00” 2.00” 2.00” Vapor Exhaust (diameter) 6.625” 6.625” 6” x 12” ELECTRICAL SUPPLY: 240V/3/60 Hz 90A 119A 235A 480V/3/60 Hz 47A 61A 119A GAS HEATED MACHINES: Supply Inlet (NPT) 1.00” 1.00” 1.25” Fume Exhaust (diameter) 6.625” 6.625” 6.625” STEAM HEATED MACHINES: Inlet/Outlet (NPT) 1.00” 1.00” 1.00” BASKET DIMENSIONS (inside) MACHINE NUMBER: #4 #5 #6 Length W 41.75” 51.75” 63.75” Width X 22.00” 25.00” 40.75” Depth Y 13.50” 15.50” 21.50” Overall Height Z 19.75” 21.75” 30.75” GENERAL DATA Load Capacity @ 100 PSI (lbs.) 2200 2200 2200 Liquid Capacity (gal.) 360 500 1200 Tank Wall Thickness (ga.) #7 #7 #7 Shipping Weight (approx. lbs.) 2090 2670 5600 HEATING DATA (See Note 4) HOURLY FUEL CONSUMPTION FROM COLD START: Natural Gas (cu. ft./hr.) 257 257 580 Steam (lbs./hr.) 150 210 500 Electric (kW) (See Note 5) 36 48 96 HEAT TIME FROM COLD START: Electric (hrs.) 3.50 3.50 5.00 Gas or Steam (hrs.) 3.00 3.50 5.00 AGITATION DATA Agitation Cycle (See Note 6) Short Medium Long Strokes (per min.) (See Note 7) 60-130 25-60 4-20 Stroke Length 4-8” 10-14” In-Out NOTES 1. Maximum load capacity of 2200 lbs. Load ratings based on available air pressure of 100 PSI and uniformly distributed load. 2. With roller platform, Dipping Space Depth (F) is reduced 1.75”. 3. Lighter loads can operate at reduced air pressure. 4. Fuel consumption and heat up times listed are based on heating from room temperature to 180o F. 5. All electric heaters are stainless steel sheated elements. Stainless steel heating coils for gas and steam heated models are optional. 6. The data shown is typical and may vary with air pressure, load weight, and shape. Air consumption 30-40 CFM (free air) with normal load on short stroke. 7. A stroke equals travel in one direction. 2010.Rev002