Text version of the page 
Text version of the page 
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Gear pumps for elastomers. Maag Pump Systems has taken gear pump performance to new levels of cost effectiveness and engineering technology with our new extrex® RB/RV pump series. High outputs, minimal tolerance deviations, and quickly attaining process stability provide an impressive cost to benefit ratio. A newly developed inlet area supports the high conveying characteristics that are specific to gear pumps, thus increasing processing tolerances when it comes to filling, degree of plasticizing, and pressure build-up during mixture preparation. The end result is an extrusion line manufacturer with much higher end product quality. | | | | | | | | | | The following standard options are also available: • Shaft cooling inclusive protection guard | | | | | | | | | | extrex® RB - for high pressure elastomer applications | | | | | | Applicable to all elastomer gear pumps | | | | | | | | | | | | | | | | | | | | | | | Outlet pressure | to 6,500 PSI / 450 bar | Mooney ML 1+4 (100) to 100 | | | | Pump sizes | 56 to 110 | Viscosity | to 30,000 Pa s | | | | Specific volumes | 59 to 457 cm3/rev | Temperature | to 265 °F / 130 °C | | | | Throughput range | 110 to 2,200 lb/hr | Inlet pressure | to 1,750 PSI / to 120 bar | | | | | 50 to 1,000 kg/h | .. Housing and cover | Alloy steel | | | | extrex® RV - for temperature-sensitive elastomers | Gear shafts | Tool steel / prepared for shaft cooling | | | | Outlet pressure | to 5,075 PSI / 350 bar | " Bearings | Tool steel | | | | Pump sizes | 36 to 110 | | viscoseal, outward pumping (application-specific) | | | | Specific volumes | 25.6 to 718 cm3/rev | .. Pump heating | by fluid | | | | Throughput range | 33 to 3,300 lb/hr 15 to 1,500 kg/h | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|