SP2100-H - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Embracing Challenge Gas Sample Probe Series SP® Electrically heated, compact version SP2100-H Special Features Sampling of dust loaded process gases The patented M&C gas sample probe version SP2100-H is used for continuous gas sampling. S mall volume, fast response time S elf-regulated electrical heater Alarm contact for low temperature Insitu probe tube 1 m long Easy mounting and maintenance The compact design requires only limited space. It is to be mounted in a weather-proof position. In case to avoid cooling and condensation of the sample in the insitu tube from the sample point to the heated sample probe the SP 30-H or SP 35-H heated sampling tubes can be used. The wide range of M&C probe accessories offers various insitu probe tubes and pre-filters to solve your specific sampling problem. Description The design of the M&C probe version SP2100-H guarantees simple mounting, safe operation and problem-free maintenance. Changing the external filter element needs no tools and no disassembling of the sample line. The complete filter assembly is removed out of the probe head. This simplifies the checkup of the filter element and the gaskets. The filter area of the probe head respectively the insitu probe tube can be cleaned very easely without dismounting the sample probe. The large external filter element of ceramic with 2 µm porosity is heated up with the stainless steel probe head to constant 180°C, using a special self-regulated heating element. This avoids dew point problems at the probe flange and filter area. A heat insulation covers all sides of the probe and ensures an optimized heat distribution as well as safe operation. The power supply of the probe can be in a range between 110V and 240V without switching. No thermostat or temperature limiter is necessary. The separate thermo switch enables a low temperature monitoring (<160°C, NO). For electrical connection a junction box with terminals is mounted. A one-meter stainless steel sampling tube is provided. This is screwed into the mounting flange. The maximum operating temperature of the tube out of stainless steel is 600°C. Technical specifications and illustrations are without obligation, subject to modifications. 10.04/06.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

 Open the catalogue to page 1

Technical Data Sample tube Sample temperature Sample pressure AmbKnil unnpeiatuie Recommended for dust loadings Filter chamber volume Filter element Probe heating temperature Temperature alarm contact, alarm point Temperature alarm, contact rating Connection sample outlet Power supply Power consumption Electrical connection Electrical equipment standard Mounting flange Material of sample contacting parts Type SS, stainless steel 316TI, length 1 m* no S-2K150, filter porosity 2 urn, ceramic 1/4"-NPT inside, for max. 10 mm tube connectors start up: 400VA, usual: 100VA, (fuse 6A) terminals max. 2,5...

 Open the catalogue to page 2

All M&C TechGroup Germany catalogues and technical brochures

  1. FPF-0.1GF

    2 Pages

    En
  2. FP-2GF

    4 Pages

    En
  3. SP2000/V20

    3 Pages

    En
  4. SP2000/PV

    2 Pages

    En
  5. PSP4000-H

    4 Pages

    En
  6. SP3000/Ex

    4 Pages

    En
  7. PSP4000-H/C

    4 Pages

    En
  8. SP3200/EX

    6 Pages

    En
  9. SP3100/EX

    6 Pages

    En
  10. SP2500-H/C/I/BB

    4 Pages

    En
  11. SP2020-H

    2 Pages

    En
  12. SP2200-H/C/I/BB

    2 Pages

    En
  13. SP2300-H

    4 Pages

    En
  14. SP10-H

    3 Pages

    En
  15. SP180-H

    2 Pages

    En
  16. SP10

    3 Pages

    En
  17. SP210-H/W

    2 Pages

    En
  18. SP52/53

    2 Pages

    En

Archived catalogues

  1. SP3000/EX

    4 Pages

    En