SP10-H - 3 Pages

  1. P. 1

  2. P. 2

  3. P. 3

Catalogue excerpts

Embracing Challenge Gas Sample Probe Series SP® Version with internal process filter SP10, SP10-H Special Features Sampling of dusty process gases F ast response time Easy mounting and maintenance Electrically heated with integrated ther- Application The M&C gas sample probe, Version SP10, are to be installed for continuous sampling of high dust loaded gases, large flow sampling, as well as for general gas sampling. Due to its compact design, it requires only limited space. It is to be mounted in a weather-proof location. mostat unit Various materials and lengths for exten- sion tubes and filters Many optional configurations are avail- Description The M&C gas sample probe Version SP10 consists of a heat resistant tube adapter with a 1» thread, on which is screwed the Stainless Steel sintered filter element type V10. This filter element type V10-/0.. has a large surface area of 325 cm2 or on request the filter element type V10-1/2.. with 960 cm2, on request with internal volume displacer for fast response time, which projects into the sampling space, standard with 270 mm lengths. Longer probe lengths of up to 2 metres are possible by means of a threaded extension tube. To protect the filter element against possible abrasion, a shape protection plate (V - form) is available. For sample temperatures up to 900 °C filters and extension tubes out of Hastelloy-C are available. In the heated model, SP10-H, an electrical heating element is fitted in the area of the probe flange, so no Dew point loss can occur. The temperature is controlled by a capillary sensor thermostat unit. When mounting in the open, a weather protection shield type 130 should be fitted.will be done incl. the filter area and the insitu probe tube or the pre-filter. Technical specifications and illustrations are without obligation, subject to modifications. 03.97/06.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

 Open the catalogue to page 1

Technical Data Probe series SP® Part Number Dust load Sample pressure Ambient temperature Insitu probe length Sample temperature Mounting flange Sample gas outlet connection Filter element without volume displacer Material of sample contacting parts Ready for operation Heater temperature adjustable Power supply Electrical connection Degree of protection / Electrical equipment standard Weight * ** non heated basis version SP 10 heated basis version SP 10-H 01 S 1000 01 S 2000 max.10 g/m3* optional >10g/m3 0.4 to 6 bar abs* -20 °C to +60 °C** 270 mm*, optional with extension tube up to 2000 mm V10...

 Open the catalogue to page 2

Power in optional with volume displacer terminal box with thermostat heating element heating block for tube fitting optional volume displacer 130 opening for sample line Technical specifications and illustrations are without obligation, subject to modifications. 03.97/06.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

 Open the catalogue to page 3

All M&C TechGroup Germany catalogues and technical brochures

  1. FPF-0.1GF

    2 Pages

    En
  2. FP-2GF

    4 Pages

    En
  3. SP2000/V20

    3 Pages

    En
  4. SP2000/PV

    2 Pages

    En
  5. PSP4000-H

    4 Pages

    En
  6. SP3000/Ex

    4 Pages

    En
  7. PSP4000-H/C

    4 Pages

    En
  8. SP3200/EX

    6 Pages

    En
  9. SP3100/EX

    6 Pages

    En
  10. SP2500-H/C/I/BB

    4 Pages

    En
  11. SP2020-H

    2 Pages

    En
  12. SP2200-H/C/I/BB

    2 Pages

    En
  13. SP2300-H

    4 Pages

    En
  14. SP180-H

    2 Pages

    En
  15. SP10

    3 Pages

    En
  16. SP2100-H

    2 Pages

    En
  17. SP210-H/W

    2 Pages

    En
  18. SP52/53

    2 Pages

    En

Archived catalogues

  1. SP3000/EX

    4 Pages

    En