PSP4000-H/C - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

Embracing Challenge Portable Gas Sample Probe PSP4000-H /C /T Special Features Light, easy to handle and compact E lectrically heated – adjustable from 100 to 180 °C With integrated micro-filter Variable probe tube- and connection Integrated temperature measurement Sample extraction also with heated sample probe tube Application Previously, gas sample probes designed for stationary use had to be used for ­nspection i measurements carried out at different locations. The weight and ­ ulkiness of such b units often caused problems for technicians engaged in mobile measurements. Now the light, handy and heated gas-sample probe PSP4000-H has been developed as a logical complement to the portable M&C sample gas conditionig systems. Despite its compact design, the unit guarantees a full range of functions. To avoid cooling and condensation of sample gas in the extraction area, a heated sample probe tube SP34-H.. (see data sheet 2-2.2) is available. changeable PTFE hosing or PSP-W4M4/6 with a smaller outside diameter is supplied. The probe’s electrical power is then fed to the probe via the feed line integrated within the sample line. An aluminiumcomposite case is optionally available for the safe transport of the probe and up to 5 meters of type PSP4M4/6 respectively 8 m of type PSP-W4M4/6 heated sample line. Description The portable gas sample probe PSP4000-H... is electrically heated. Temperature controlling is achieved by an integrated capillary sensorthermostat, adjustable from 100 to 180 °C. A signal lamp is extinguished on reaching the operating ­ emperature and flashes in the t cycle of temperature regulation. A carrying handle and a chain for in situ attachment are mounted on the heat-isolated housing. The integrated micro-filter element with a fineness degree of 2 µm reliably retains solid impurities and can be changed easily. For heavy-oil firing measurements, a stainless-steel filter cartridge /FW for filterpads is optionally available. The wide and versatile range of sampling probes with diameters from 6 to 12 mm ø, adapters and thread fittings allows adaptation to the most varied circumstances. At the version PSP4000-H/C calibration gas injection into the probe is possible ­ ithout w dismounting the probe. Simultaniously temperature measurement during sample extraction is also ­ vailable for a version PSP4000-H/C/T. In conjunction with the gas sample probe PSP4000-H..., a specially designed heated sample line PSP4M4/6 with inter- Technical specifications and illustrations are without obligation, subject to modifications. 09.96/06.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

 Open the catalogue to page 1

Portable Gas Sample Probe PSP4000-H... Basic version PSP4000-H Sample facilities Sample tubes incl. connector Length: 1m* Material: SS316 3/8" Connector incl. PTFE-ferrule 8mm Cable 4m * with plug Heated sample line PSP 4M4/6 Swagelok union 94S0025 Plug 94S0020 O-Ring 94S0030 Adapter for extensible probe length Tube 8x1mm , Material: SS316 PSP4000-H/C/T Adapter with cone-shaped part for openings of Ø10-20mm Thermo couple sensor Extensible probe tube length of 80-200mm Thermo couple sensor PTFE-key ring M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com •...

 Open the catalogue to page 2

Technical Data Probe Series SP® Portable Version PSP4000 Part No. 230V Part No. 115V Sample temperature Sample pressure Ambient temperature Filtration chamber volume Filter element Probe temperature Ready for operation Gas inlet Gas outlet After approximately 30 minutes Basic connection G 3/8"i, probe tube or adapters optional 1/8" NPT + tube connector 6 mm (8 mm optional) and pipe clamp for attachment of heated sample line 220-240V 50/60Hz, 200 W or 115V 60Hz Plug and socket connector 7 pin with 4 meter connection cable EN 61010, EN 60335-1 IP40 EN 60529 Stainless steel 316Ti, ceramic, FPM 3,5...

 Open the catalogue to page 3

extra price for PSP4000-H.. with sample outlet ø 8 mm tube connector extra price for PSP4000-H /FW with special filter cartridge filled with special spun glass with M12-connection, material SS316Ti, FPM sample adapter with variable probe tube length: 3/8" adapter fitting with gasket and 8 mm PTFE sealing ring adapter with cone-shaped part for openings of ø 10-20 mm and ø 8 mm probe tube out of stainless steel 316, extensible 80-200 mm. ø 8 mm probe tube out of stainless steel 316Ti with position indication, for extensible probe length of 190-300 mm. fixed probe tubes with male connector G 3/8",...

 Open the catalogue to page 4

All M&C TechGroup Germany catalogues and technical brochures

  1. FPF-0.1GF

    2 Pages

    En
  2. FP-2GF

    4 Pages

    En
  3. SP2000/V20

    3 Pages

    En
  4. SP2000/PV

    2 Pages

    En
  5. PSP4000-H

    4 Pages

    En
  6. SP3000/Ex

    4 Pages

    En
  7. SP3200/EX

    6 Pages

    En
  8. SP3100/EX

    6 Pages

    En
  9. SP2500-H/C/I/BB

    4 Pages

    En
  10. SP2020-H

    2 Pages

    En
  11. SP2200-H/C/I/BB

    2 Pages

    En
  12. SP2300-H

    4 Pages

    En
  13. SP10-H

    3 Pages

    En
  14. SP180-H

    2 Pages

    En
  15. SP10

    3 Pages

    En
  16. SP2100-H

    2 Pages

    En
  17. SP210-H/W

    2 Pages

    En
  18. SP52/53

    2 Pages

    En

Archived catalogues

  1. SP3000/EX

    4 Pages

    En