KS2.EX LIQUID SENSOR - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Embracing Challenge Liquid alarm sensor KS 2 / KS 2.Ex for non-conductive and conductive media Special Features Sure detection even of minimal liquid Integrable in M&C-universal filters and flow chamber Explosion proof version according to Application Liquid alarm sensors are used in gas sample conditioning systems for monitoring gas cooling and condensate drain-off devices in order to provide protection for downstream analysis instruments. This monitoring device KS 2/KS 2.Ex reliably signals the penetration of non conductive (e.g. alcohol) and conductive (e.g. water) liquid in the event of cooling or condensate drain-off equipment being defective, thus avoiding expensive down time as well as high repair costs for analysis instruments. In the event of an alarm, power for the sample gas pump must be switched off or a solenoid valve must be switched idle in the sample conditioning system. Description The M&C liquid sensor KS 2/KS 2.Ex works on the principle of capacitive measurement and is suitable for non-conductive and conductive media. A pre-amplifier is integrated in the sensor housing and is connected with the necessary external electronic controller via 2- resp. 3-wire. For KS 2 the required electronic controller is available in various versions, FA1.1; FA1.4 and is described in the separate data sheet 9.5. The M&C liquid sensor KS 2.Ex for use in hazardous areas and media should only be applied in connection with electronic controller WE77.Ex1 or KFA6-SR2-Ex1W. The M&C KS 2/KS 2.Ex liquid sensor is constructed in such a way that any droplets of liquid in the sample gas are attracted directly to the active sensor surface. Even the smallest liquid droplets will trigger a sure and rapid alarm. The sensors are mounted with the 16mm ø stainless steel body in the GL-25 connector of the universal filter F..-..-D or the condensate pot TG1 or in the flow chamber LS/KS. Technical specifications and illustrations are without obligation, subject to modifications. 04.99/11.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

 Open the catalogue to page 1

Dimensions KS 2 / KS 2.Ex liquid sensor Liquid alarm sensor KS 2 / KS 2.Ex in a universal filter F..-..-D * Chemraz is a trade mark of Greene Tweed KS 2..liquid sensor for level monitoring in condensate pot TG1 In the event of condensate penetration, the filter housing acts as a buffer vessel preventing immediate liquid penetration. Technical Data Sensor Part No. Pressure Max. operating temperature Liquid alarm limit Material of sample contacting parts Sample connection Option sample connection ø 18 mm, Part No.. 03E9400 (fitting for mounting: Part No. 09V2317 GE SS 1/2“NPT-18mm) Power supply...

 Open the catalogue to page 2

All M&C TechGroup Germany catalogues and technical brochures

  1. FPF-0.1GF

    2 Pages

    En
  2. FP-2GF

    4 Pages

    En
  3. SP2000/V20

    3 Pages

    En
  4. SP2000/PV

    2 Pages

    En
  5. PSP4000-H

    4 Pages

    En
  6. SP3000/Ex

    4 Pages

    En
  7. PSP4000-H/C

    4 Pages

    En
  8. SP3200/EX

    6 Pages

    En
  9. SP3100/EX

    6 Pages

    En
  10. SP2500-H/C/I/BB

    4 Pages

    En
  11. SP2020-H

    2 Pages

    En
  12. SP2200-H/C/I/BB

    2 Pages

    En
  13. SP2300-H

    4 Pages

    En
  14. SP10-H

    3 Pages

    En
  15. SP180-H

    2 Pages

    En
  16. SP10

    3 Pages

    En
  17. SP2100-H

    2 Pages

    En
  18. SP210-H/W

    2 Pages

    En
  19. SP52/53

    2 Pages

    En

Archived catalogues

  1. SP3000/EX

    4 Pages

    En