Gas sampling - Sample tubes - M&C TechGroup Germany - #1

Text version of the page

M&C | TechGroup Germany GmbH Rehhecke 79, D-40885 Ratingen info@mc-techgroup.com www.mc-techgroup.com Fon +49 (0)2102 935-0 Fax +49 (0)2102 935-111 2-1.1.0.6 09.96/06.06 Application The M&C sample tubes are used in combination with the M&C gas sample probes series SP® for point selective continuous gas sampling in processes with low dust loadings. Sample Tubes for Gas Sample Probes Series SP® with G 3/4"-connection thread Special Features For dust loading up to 2g/m3 Point selective sampling Sampling after wet scrubber up to 90 °C Sampling temperature up to max. 1800 °C Different lengths Great variety of materials Easy mounting Description The M&C probe sample tubes SP210/SS and SP2000/... are selected according to the specific applications. Influencing process parameter are the gas composition, dust content, water vapure saturation, temperature, pressure and gas velocity. Among the standard length “L1” other lengths up to “L max” are available on request. For applications with low sample gas flow, sample tubes SP2000/SS-Vm are equipped with volume displacers to decrease the retention time. Gas sampling downstream a wet scrubber with a high content of water carried out with the M&C sampling tube SP32, equipped with an integrated demister for liquid drop collection. Depending on the selected material, the M&C sample tubes are equipped with a welded thread adapter or a support adapter. They are partly made of different material than the tubes, depending on fabrication. See below table. The connection thread enables an easy mounting into the mounting flange of the M&C gas sample probes. Further sampling accessories: For a high dust load Pre-filter V20.., V12... For lower deviation of dew point on process side heated sample tubes SP30, SP35. Sample tubes for series SP®