Gas sample probes - portable: PSP4000-H - M&C TechGroup Germany - #1

Text version of the page

1 M&C | TechGroup Germany GmbH Rehhecke 79, D-40885 Ratingen info@mc-techgroup.com www.mc-techgroup.com Fon +49 (0)2102 935-0 Fax +49 (0)2102 935-111 2-2.1 09.96/06.06 Application Previously, gas sample probes designed for stationary use had to be used for inspection measurements carried out at different locations. The weight and bulkiness of such units often caused problems for technicians engaged in mobile measurements. Now the light, handy and heated gas-sample probe PSP4000-H has been developed as a logical complement to the portable M&C sample gas conditionig systems. Despite its compact design, the unit guarantees a full range of functions. To avoid cooling and condensation of sample gas in the extraction area, a heated sample probe tube SP34-H.. (see data sheet 2-2.2) is available. Description The portable gas sample probe PSP4000-H... is electrically heated. Temperature controlling is achieved by an integrated capillary sensorthermostat, adjustable from 100 to 180 °C. A signal lamp is extinguished on reaching the operating temperature and flashes in the cycle of temperature regulation. A carrying handle and a chain for in situ attachment are mounted on the heat-isolated housing. The integrated micro-filter element with a fineness degree of 2 ìm reliably retains solid impurities and can be changed easily. For heavy-oil firing measurements, a stainless-steel filter cartridge /FW for filterpads is optionally available. The wide and versatile range of sampling probes with diameters from 6 to 12 mm ø, adapters and thread fittings allows adaptation to the most varied circumstances. At the version PSP4000-H/C calibration gas injection into the probe is possible without dismounting the probe. Simultaniously temperature measurement during sample extraction is also available for version PSP4000-H/C/T. In conjunction with the gas sample probe PSP4000-H..., a specially designed heated sample line PSP4M4/6 with interchangeable PTFE hosing or PSP-W4M4/6 with a smaller outside diameter is supplied. Portable Gas Sample Probe PSP4000-H /C /T Special Features Light, easy to handle and compact construction Electrically heated – adjustable from 100 to 180 °C With integrated micro-filter Variable probe tube- and connection technique Integrated temperature measurement Sample extraction also with heated sample probe tube The probe's electrical power is then fed to the probe via the feed line integrated within the sample line. An aluminiumcomposite case is optionally available for the safe transport of the probe and up to 5 meters of type PSP4M4/6 respectively 8 m of type PSP-W4M4/6 heated sample line. PSP-4000-H