M&C | TechGroup Germany GmbH
Rehhecke 79, D-40885 Ratingen
info@mc-techgroup.com
www.mc-techgroup.com
Fon +49 (0)2102 935-0
Fax +49 (0)2102 935-111
2-1.1 10.04/01.08
Application
The M&C sample probes version SP2000...,
SP2300-H and SP2400-H are used for continuous
extraction
of gases from dust loaden,
hight temperature and/or humid processes.
Description
The sample probes are designed for easy
installation, reliable operation and trouble
free maintenance. They are versatile in application
and depending on the task to be performed
various sample
tubes or pre-filters
(see data sheet 2-1.1.0.6 and 2-1.1.0.8), not
included in the scale of delivery, can be simply
screwed into the probe (G 3/4" thread).
The filter element (ceramic is standard,
others optional) with a large surface area
and high capacity is located in the external
housing.
The design offers little or no stagnant
space external to the process. The probes
are designed so that changing a filter
element does not involve the use
of tools. In this operation neither the sample
probe tube nor sample line need to
be removed, thus avoiding contamination
of the clean gas path and maintaining the
integrity
of the system.
The sample tube can be cleaned, washed or
rodded-out from outside the process. The
special design of the heating element of the
SP2000/2300/2400-H (with protective hood)
permits
controlled heating of the complete
filter housing, including the mounting flange
up tp 180 °C (Version /H320 up to 320
°C). This ensures reliable operation external
to the process preventing the temperature
falling
below the dew-point.
The temperature of the standard probe is
controlled by an integral compact design
capillary sensor thermostat
with an excess
temperature limit switch and an alarm function
for temperature
failure. The probe can
be provided with test and reference gas
facilities.
Gas Sample Probe Series SP®
Version SP2000, SP2000-H, SP2300-H, SP2400-H
Special Features
Optimum operational reliability
Universal applicability
Adaption to nearly all process
conditions due to its compact and
modular design
Easy mounting and maintanance
Small volume, fast response time
Patented construction
Problem-free maintenance
Depending on the gas composition, it is
possible that the standard material of the
probe body (stainless steel 316) will not be
sufficiently corrosion resistant. In this case
probe SP2300-H made of PTFE or SP2400-H
made of Titanium should be used.
SP2000-H
