2-1.1 M&C | TechGroup Germany GmbH
Rehhecke 79, D-40885 Ratingen
info@mc-techgroup.com
www.mc-techgroup.com
Fon +49 (0)2102 935-0
Fax +49 (0)2102 935-111
Dimensions
SP2000-H basic version with options (Examples)
Dimensions in mm
Tu<-30°C
0-180°C
To>+30°C
3456789
LL'
1
N 2
Power
230V,50Hz
(115V,60Hz)
Cal. gas
(Backflush)
Sample outlet* Second sample outlet
Tref.
Alarm
contact
Backflush
G1/4"i (Cal. gas)
Actuator
pressure
inlet
*Standard
100
345
1/4"NPTi
ø 6
ø 14
110
ø 130
340
207
260
Gas Sample Probe Version SP2000 SP2000-H SP2300-H SP2400-H
Part No. 20S1000 20S2000 20S3000 20S3500
Protective cover no yes yes yes
Degree of protection IP54 EN60529
Filter housing material Stainless steeel 316* PTFE Titanium
Sealing materials FPM* /7aT** = PTFE /H320** = graphite
Probe flange sealing material Novapress
Insitu probe tube/prefilter Optional
Sample pressure max. 0,4-6 bar* abs., /7aT**= 2 bar abs., /HP** = 25 bar abs. 2 bar abs. 0,4-6 bar abs.
Ambient temperature 20 °C to +180 °C -20 °C to +60 °C*** /PT100, /Fe-CuNi, /Ni-CrNi** = -20°C to +80°C
Filter chamber volume 120 cm3
Filter element, porosity S-2K150= Ceramic*, 2micron, /F-0, 1GF150= Glass fibre**, 0,1 micron, /FW= Spun glass**
Thermostat, Temperature adjustment 0-180°C* /H320**= 0-320°C /PT100** /Fe-CuNi** /Ni-CrNi**
Ready for operation after 40min /H320** = after 60min
Low temperature alarm contact* Contact rating: 250V, 3A~, 0,25A= Alarm point: ÄT 30°C
Sample gas outlet connection 1x 1/4“ NPTi* tube connectors ø 6, 8 or 10 mm** /H320**= 6 mm
Backflush/Test gas connection 1/4“ NPTi* /R**, /H320**= tube ø 6 mm
Power supply 230V 50/60 Hz, 800W /115V** = 115V 60Hz, 800W (fuse protection 10A)
Electrical connections Terminals max. 4mm2, 2x PG 13,5 cable gland
Electrical equipment standard EN 61010, EN 60519-1
Mounting flange DN65 PN6-B >DN or ANSI possible** /HP** = DN50 PN25
Mounting flange material SS316Ti PTFE Titanium
Weight 7 kg* 15,4 kg* 15,4 kg* 14,5kg*
ÄP and T90 at flow of: 100 200 500 1000 1500 3000 (only /HF) Nl/hr
ÄP with new
filter element S-2K150/GF150 0,007 0,005 0,02 0,058 0,135 0,240/0,225 bar
T90-time for SP2000-H without tube 6 3,5 1 <0,5 <0,5 <0,5 s
Differential pressure and T90-time
Technical Data
* Standard
** Options (/H320 not for SP2300-H, /7aT** not for SP2300-H and SP2400-H)
*** In case of higher ambient temperatures use option PT100 (Part No. 20S9025) or thermocouple Fe-CuNi respectively Ni-CrNi (Part No. 20S9027 resp.
20S9028) instead of the thermostate controller. Then, an additional electronic temperature controller (see data sheet 2-5.1) is necessary.
