Gas Sample Probe Series SP® Version SP2000, SP2000-H, SP2400-H - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

Embracing Challenge Gas Sample Probe Series SP® Version SP2000, SP2000-H, SP2300-H, SP2400-H Special Features Optimum operational reliability Universal applicability Adaption to nearly all process condi- tions due to its compact and modular design Easy mounting and maintanance Small volume, fast response time Application The M&C sample probes version SP2000..., SP2300-H and SP2400-H are used for continuous ­ xtraction of gases from dust loaden, e hight temperature and/or humid processes. Depending on the gas composition, it is possible that the standard material of the probe body (stainless steel 316) will not be sufficiently corrosion resistant. In this case probe SP2300-H made of PTFE or SP2400-H made of Titanium should be used. The sample probes are designed for easy installation, reliable operation and trouble free maintenance. They are versatile in application and depending on the task to be performed various sample tubes or pre-filters (see data sheet 2.14 and 2.17), not included in the scale of delivery, can be simply screwed into the probe (G 3/4» thread). The filter element (ceramic is standard, others optional) with a large surface area and high capacity is located in the external housing. The design offers little or no stagnant space external to the process. The probes are designed so that changing a filter element does not involve the use of tools. In this operation neither the sample probe tube nor sample line need to be removed, thus avoiding contamination of the clean gas path and maintaining the i ­ntegrity of the system. The sample tube can be cleaned, washed or rodded-out from outside the process. The special design of the heating element of the SP2000/2300/2400-H (with protective hood) p ­ ermits controlled heating of the complete filter housing, including the mounting flange up tp 180 °C (Version /H320 up to 320 °C). This ensures reliable operation ­ xternal to the e process preventing the temperature ­ alling f below the dew-point. The temperature of the standard probe is controlled by an integral compact design capillary sensor ­ hermostat with an excess t temperature limit switch and an alarm function for ­ emperature failure. The probe can be t provided with test and reference gas facilities. Technical specifications and illustrations are without obligation, subject to modifications. 10.04/06.06 M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

 Open the catalogue to page 1

Technical Data Gas Sample Probe Version Part No. Protective cover Degree of protection Filter housing material Sealing materials Probe flange sealing material Insitu probe tube/prefilter Sample pressure max. Ambient temperature Filter chamber volume Filter element, porosity SP2000 SP2000-H SP2300-H SP2400-H 20S1000 20S2000 20S3000 20S3500 no yes yes yes IP54 EN60529 Stainless steeel 316* PTFE Titanium FPM* /7aT** = PTFE /H320** = graphite Novapress Optional 0,4-6 bar* abs., /7aT**= 2 bar abs., /HP** = 25 bar abs. 0,4-2 bar abs. 0,4-6 bar abs. 20 °C to +180 °C -20 °C to +60 °C*** /PT100, /Fe-CuNi,...

 Open the catalogue to page 2

Basic versions and options (choice) Basic executions Basic execution, non-heated, without weather protection shield, material SS 316Ti Basic execution, heated to 0-180 °C ,with weather protection shield, material SS 316Ti Basic execution, heated to 0-180 °C, , with weather protection shield, material PTFE Basic execution, heated to 0-180 °C, , with weather protection shield, material Titanium Options integrated in the gas sample probe (extract) Power supply 115V/60Hz Top of filter case with PTFE-rings and seals of PTFE Second outlet for sample gas 1/4" NPTi Back purge/calibration gas valve, opening...

 Open the catalogue to page 3

Options for basic versions Short term /115V /7aT /2x /R /R-Ti /GF150 /FW /FW 320 /H320 /HP /GVW1 /GVW /PT100 /FeCuNi /Ni-CrNi /2-PT100 /ST /D /DN /SO1 /VA /3VA /VA320 /3VA320 /MS1 /MS3 /EA230 /EA115 /EA24 /HF – not possible X possible The above table does only indicate the possible options for the different probe types. This is no statement about the possible combinations of these options with each other in a probe model. In case you are looking for several options to be combinated, please ask our sales team for technical advice. M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany...

 Open the catalogue to page 4

All M&C TechGroup Germany catalogues and technical brochures

  1. FPF-0.1GF

    2 Pages

    En
  2. FP-2GF

    4 Pages

    En
  3. SP2000/V20

    3 Pages

    En
  4. SP2000/PV

    2 Pages

    En
  5. PSP4000-H

    4 Pages

    En
  6. SP3000/Ex

    4 Pages

    En
  7. PSP4000-H/C

    4 Pages

    En
  8. SP3200/EX

    6 Pages

    En
  9. SP3100/EX

    6 Pages

    En
  10. SP2500-H/C/I/BB

    4 Pages

    En
  11. SP2020-H

    2 Pages

    En
  12. SP2200-H/C/I/BB

    2 Pages

    En
  13. SP2300-H

    4 Pages

    En
  14. SP10-H

    3 Pages

    En
  15. SP180-H

    2 Pages

    En
  16. SP10

    3 Pages

    En
  17. SP2100-H

    2 Pages

    En
  18. SP210-H/W

    2 Pages

    En
  19. SP52/53

    2 Pages

    En

Archived catalogues

  1. SP3000/EX

    4 Pages

    En