Electrical heated Filter Type FSS-.../H350 - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Special Features ■ Electrically heated, max. 350 °C ■ Large filter surface ■ Consequent connection technique ■ No cold spots ■ Incorporated thermostat ■ Status alarm ■ Easy maintenance Electrical heated Filter Type FSS-.../H350 with incorporated thermostat, max. 350 °C Application The electrically heated M&C filter type FSS../ H350 separates fine particles out of the sample gas at operating temperatures up to 350 °C. For an efficient filtration very fine filter elements with high deep action are used. Description The M&C filter FSS../H350 is mounted thermally isolated on a plate. The stainless steel filter body with integrated filter element, alternatively of ceramic, stainless steel or special spun glass, is completely covered by a heated metal enclosure. The high capacity heating element is controlled by an incorporated compact capillary sensor thermostat in a temperature range of +50 °C to 350 °C. The thermostat is equipped with an temperature limiter switch with reset key, releasing at 30 °C above set-temperature, and a voltage-free low temperature alarm contact at 30 °C below set-temperature. In order to avoid cold spots, the welded connecting fittings are heated up with the filter by means of two conducting jaws. Outside the lagged cap a junction box is mounted which contains the thermostat as well as the terminals for electrical connection. Two brackets fix the heated lines. - See data sheet 2-6.1.— The complete conception guarantees a safe operation and a simple maintenance. No tools are needed for replacing the filter element, during the heated sample lines remain in their position. Technical specifications and illustrations are without    M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany obligation, subject to modifications.10.96/11.06    info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102

 Open the catalogue to page 1

Dimensions Heated Filter Type FSS-.../H350 Alarm contact Technical Data Heated filter type Part-No. Filter element length 150 mm, material Filter porosity Filter surface Operating pressure max. Ambient temperature / storage temperature Dead volume Gas connections Temperature controller FSS-2K/H350 FSS-3SS/H350 FSS-FW/H350 01F3035 01F3030 01F3045 ceramic stainless steel SS316 spun glass 2 µm 3 µm 140 cm2 5 bar g -20 °C to +60 °C 130 cm3 Swagelok tube connector ø6 mm, optional ø1/4" incorporated capillary sensor thermostat, with temperature limiter switch and low temperature alarm contact adjustable...

 Open the catalogue to page 2

All M&C TechGroup Germany catalogues and technical brochures

  1. FPF-0.1GF

    2 Pages

    En
  2. FP-2GF

    4 Pages

    En
  3. SP2000/V20

    3 Pages

    En
  4. SP2000/PV

    2 Pages

    En
  5. PSP4000-H

    4 Pages

    En
  6. SP3000/Ex

    4 Pages

    En
  7. PSP4000-H/C

    4 Pages

    En
  8. SP3200/EX

    6 Pages

    En
  9. SP3100/EX

    6 Pages

    En
  10. SP2500-H/C/I/BB

    4 Pages

    En
  11. SP2020-H

    2 Pages

    En
  12. SP2200-H/C/I/BB

    2 Pages

    En
  13. SP2300-H

    4 Pages

    En
  14. SP10-H

    3 Pages

    En
  15. SP180-H

    2 Pages

    En
  16. SP10

    3 Pages

    En
  17. SP2100-H

    2 Pages

    En
  18. SP210-H/W

    2 Pages

    En
  19. SP52/53

    2 Pages

    En

Archived catalogues

  1. SP3000/EX

    4 Pages

    En