catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Modular cabinet, Mezzanine, Tool cabinet, Cart, Container trolley
Text version of the page
Materials - Roll-formed uprights - hot-rolled steel of gauges specified. Shelfclips - hot-rolled steel of gauges specified. Other sheet steel - cold-rolled and hot-
rolled and of gauges specified.
1 with a
1 return flange, spot-welded to the bottom portion of the shelf. he portion of the ox W formation shall have a 10-degree bend in the center for additional strength and rigidity. he front and rear flanges of the shelf shall be punched to accept bin fronts, label holders and other accessories. Ends are to be flanged not less than 1
1 centers with pairs of parallel slots
111 11 with a 0-degree return flange of not less than . Allcorners lapped and welded. All shelves punched on centers for divider attach- ment. he front and rear flanges of the shelf are to be embossed with 0 GA. long, with one slot keyhole-shaped for bolting cross braces and accessories touprights. tra Heavy Duty Industrial Shelves - 1-gauge with front and rear oxW formation. he front and rear ox W formation is not less than 1 pen Uprights - consist of two 1-gauge, hot-rolled, formed steel ’s 1
1 x
1 x
1 with one pair of 1 x 1-gauge band cross braces on uprights less than 10high. Uprights 10 and higher - two or more pairs of 1 x 1-gauge band cross braces as required.
11 x x1
1 with a
1 return flange spot-welded to the bottom portion of the shelf. he portion of the ox W formation shall have a 10-degree bend in the center for additional strength and rigidity. he front and rear flanges of the shelf shall be punched to accept bin fronts, label holders and other accessories. Ends are to be flanged not less than 1 Closed Uprights - two 1-gauge, hot-rolled, formed steel ’s 1
1 x
1 x
1 with-gauge side sheet spot-welded on centers to the
ee en ee en 1 extension of the .
11 Lateral Cross Braces Backs - two half panels of heavy gauge steel providing a total of three verticalrows of holes on 1 - 1 x 1-gauge band formed and punched at each end tobolt to upright post. One pair of lateral cross braces - used with every three shelving sections with shelf spacing less than 0. Shelving sections with 0 or greater shelf spacings - two pairs of lateral cross braces with every three shelving sections. with a 0-degree return flange of not less than . Allcorners lapped and welded. All shelves punched on centers for divider attach- ment. Shelves also punched at four corners for bolting to up-rights. he front and rear flanges of the shelf are to be embossed with 1 GA. Beaded Post Uprights - all posts shall be punched on 1
1 centers with pairs ofparallel slots
111 long with one slot keyhole-shaped for bolting cross braces andother accessories to uprights. NOE: Due to loading limitations, beaded post shelv- ing is designed for single-tier (non-mezzanine) use only.Open Uprights shall consist of one front 1-gauge, cold-rolled, formed steel beadedpost x
1 x
1 and one rear 1-gauge, hot-rolled, formed steel tee 1
1 x
1 x
1 and one pair of 1 x 1-gauge band cross braces on uprights less than 10high. Uprights 10 and higher shall have two or more pairs of 1 x 1-gauge band cross braces as required.Closed uprights shall consist of one front 1-gauge, cold-rolled, formed steelbeaded post x
1 centers for attachment to shelves with back to shelf clipsoptional and with three screws at the top and bottom shelves, two at midpoint. One-piece backs are optional - heavy gauge steel, no wider than .
1 Shelf Boes Label Holders - heavy gauge steel body with divider slots on 1 centers of boxsides. heavy gauge box fronts have integral handle and card holder. eavy gauge box backs have integral E stop. Shelf boxes provided with heavy gauge galvanized steel dividers with integral card holders. x
1 and one rear 1-gauge, hot-rolled, formed steel tee 1
1 - -gauge steel, friction type with inside dimension, andattached to shelves with three spring fasteners. x
1 x
1 and shall have a -gauge side sheet spot-welded on centers on the
1 extensions of the beaded post and the tee. Crosswise Dividers - Front and rear edges - O.D. curls. op and bottom -flanges not less than punched for attaching to shelves. All crosswise dividers upto 1 high and 1 deep are heavy gauge steel. Crosswise dividers over 1 high and 1 deep are heavy gauge steel. ffset Angle Uprights - all uprights shall be punched on 1
1 centers with pairsof parallel slots
11 long with one slot to have an
11 diameter hole in center for theattachment of cross braces, bolting shelving and other accessories. he end of each slot is embossed to ensure perfect clip fit-up.Open uprights consist of two 1-gauge, hot-rolled, formed steel offset angles 1 x with one pair of 1 x 1-gauge band cross braces on uprights less than high. Uprights and higher shall have two or more pairs of 1 x 1-gauge band cross braces as required.Closed uprights consist of two 1-gauge, hot-rolled, formed steel offset angles 1x with -gauge side sheet. Side sheets are punched with holes for bolting touprights. Lengthwise Dividers - Range from -gauge to 1-gauge steel dependingupon shelf spacings. Bin Fronts - op and bottom edges - “Bo Post” Uprights - all posts shall be punched on 1
1 1 1 O.D. curl. Each end - offset to engageupright ’s. in fronts - punched to screw to the front flange of shelves. Labelholder tangs on centers -provided on bin fronts. 1 bin fronts - heavy gauge steel bin fronts wider than shall be heavy gauge. centers to accept eitherclip attachment or bolt attachment. Each upright shall consist of two 1-gauge, hot- rolled, formed steel box posts 1 x 1
11 with two
111 x 1-gauge ladderbraces on uprights of or less. 10 and 1 uprights require three ladder braces. Bases - channel shaped with ends constructed to engage upright ’s and lock inplace with a spring fastener. high base - heavy gauge steel and high bases shall be heavy gauge. Shelf Clips - 1 gauge, hot-rolled, one-piece construction. Four shelf clips usedwith each shelf.NOE: ox post uprights require the use of the Sliding Doors - heavy gauge steel with three heavy gauge horizontal pan rein-forcements on full-height sliding doors and one heavy gauge horizontal pan rein-forcement on above and below ledge sliding doors with built-in pulls and one built-in lock per pair of doors. Sliding doors - suspend and operate from integral ball bearing rollers that run on 1-gauge upper tracks and are contained by 1-gaugelower tracks. Each pair of sliding doors covers two full sections of wide shelv-ing. NOE: Sliding doors are to be used with -post uprights only. 6516 integration clip. Swinging Doors - heavy gauge steel with one full-height heavy gauge pan rein-forcement per door. Each pair of double swinging doors has three point latchingwith one built-in lock. One pair of double swinging doors covers one full section of wide shelving.
11 x x 1
1 with a
1 return flange spot-welded to bottom surface of the shelf. he portionof the ox W formation shall have a 10-degree bend in the center for additionalstrength and rigidity. he front and rear flanges of the shelf shall be punched to accept bin fronts, label holders and other accessories. Ends are to be flanged not less than 1 Counter ops - 1-gauge steel with cornice formation at front and rear. 1-gauge end finishing strips attached with bolts. Ledges and Ledge ops Seismic Information - Lyon is equipped to handle all seismic requirements.Contact your local Lyon factory representative for specific seismic information relat- ing to your area. - 1-gauge steel with cornice formation at front.Optional 1-gauge end finishing strips attached with bolts. Ledge shelves - 1- gauge with optional Class front flange reinforcements. Ledge shelves - bolted to front flanges of existing shelves and attached to two front upright ’s with 1- gauge shelf clips. NOE: For -post upright only.
11 with a 0-degree return flange of not less than . All cornerslapped and welded. All shelves punched on centers for divider attachment. he front and rear flanges of the shelf are to be embossed with GA. Shelves also punched at corners for bolting to uprights. raditional Industrial Shelves - 1-gauge with front and rear flanged down notless than 1
11 with return flange of not less than at approximately 10 degrees,and punched to accommodate label holder and accessories. Ends are to be flanged not less than 1
11 with a 0-degree return flange of not less than . All cornerslapped and welded. All shelves punched on centers for divider adjustment. he front and rear flanges are to be embossed with 1 GA. Must request punching for bolting to uprights for 1, 1, and . Heavy Duty H Industrial Shelves - 0-gauge with front and rear ox W formation. he front and rear ox W formation is not less than 1
2008 General Catalogue - 28115 eres en peccaons
11 x x 11 with a
1 return flange, spot-welded to the bottom portion of the shelf. he portion of the ox W formation shall have a 10-degree bend in the center for additional strength and rigidity. he front and rear flanges of the shelf shall be punched to accept bin fronts, label holders and other accessories. Ends are to be flanged not less than 1
Uprights
“” Uprights - all posts punched on 11 centers with pairs of parallel slots
111 11 with a 0-degree return flange of not less than . Allcorners lapped and welded. All shelves punched on centers for divider attach- ment. he front and rear flanges of the shelf are to be embossed with 0 GA. long, with one slot keyhole-shaped for bolting cross braces and accessories touprights. tra Heavy Duty Industrial Shelves - 1-gauge with front and rear oxW formation. he front and rear ox W formation is not less than 1 pen Uprights - consist of two 1-gauge, hot-rolled, formed steel ’s 1
1 x
1 x
1 with one pair of 1 x 1-gauge band cross braces on uprights less than 10high. Uprights 10 and higher - two or more pairs of 1 x 1-gauge band cross braces as required.
11 x x1
1 with a
1 return flange spot-welded to the bottom portion of the shelf. he portion of the ox W formation shall have a 10-degree bend in the center for additional strength and rigidity. he front and rear flanges of the shelf shall be punched to accept bin fronts, label holders and other accessories. Ends are to be flanged not less than 1 Closed Uprights - two 1-gauge, hot-rolled, formed steel ’s 1
1 x
1 x
1 with-gauge side sheet spot-welded on centers to the
ee en ee en 1 extension of the .
11 Lateral Cross Braces Backs - two half panels of heavy gauge steel providing a total of three verticalrows of holes on 1 - 1 x 1-gauge band formed and punched at each end tobolt to upright post. One pair of lateral cross braces - used with every three shelving sections with shelf spacing less than 0. Shelving sections with 0 or greater shelf spacings - two pairs of lateral cross braces with every three shelving sections. with a 0-degree return flange of not less than . Allcorners lapped and welded. All shelves punched on centers for divider attach- ment. Shelves also punched at four corners for bolting to up-rights. he front and rear flanges of the shelf are to be embossed with 1 GA. Beaded Post Uprights - all posts shall be punched on 1
1 centers with pairs ofparallel slots
111 long with one slot keyhole-shaped for bolting cross braces andother accessories to uprights. NOE: Due to loading limitations, beaded post shelv- ing is designed for single-tier (non-mezzanine) use only.Open Uprights shall consist of one front 1-gauge, cold-rolled, formed steel beadedpost x
1 x
1 and one rear 1-gauge, hot-rolled, formed steel tee 1
1 x
1 x
1 and one pair of 1 x 1-gauge band cross braces on uprights less than 10high. Uprights 10 and higher shall have two or more pairs of 1 x 1-gauge band cross braces as required.Closed uprights shall consist of one front 1-gauge, cold-rolled, formed steelbeaded post x
1 centers for attachment to shelves with back to shelf clipsoptional and with three screws at the top and bottom shelves, two at midpoint. One-piece backs are optional - heavy gauge steel, no wider than .
1 Shelf Boes Label Holders - heavy gauge steel body with divider slots on 1 centers of boxsides. heavy gauge box fronts have integral handle and card holder. eavy gauge box backs have integral E stop. Shelf boxes provided with heavy gauge galvanized steel dividers with integral card holders. x
1 and one rear 1-gauge, hot-rolled, formed steel tee 1
1 - -gauge steel, friction type with inside dimension, andattached to shelves with three spring fasteners. x
1 x
1 and shall have a -gauge side sheet spot-welded on centers on the
1 extensions of the beaded post and the tee. Crosswise Dividers - Front and rear edges - O.D. curls. op and bottom -flanges not less than punched for attaching to shelves. All crosswise dividers upto 1 high and 1 deep are heavy gauge steel. Crosswise dividers over 1 high and 1 deep are heavy gauge steel. ffset Angle Uprights - all uprights shall be punched on 1
1 centers with pairsof parallel slots
11 long with one slot to have an
11 diameter hole in center for theattachment of cross braces, bolting shelving and other accessories. he end of each slot is embossed to ensure perfect clip fit-up.Open uprights consist of two 1-gauge, hot-rolled, formed steel offset angles 1 x with one pair of 1 x 1-gauge band cross braces on uprights less than high. Uprights and higher shall have two or more pairs of 1 x 1-gauge band cross braces as required.Closed uprights consist of two 1-gauge, hot-rolled, formed steel offset angles 1x with -gauge side sheet. Side sheets are punched with holes for bolting touprights. Lengthwise Dividers - Range from -gauge to 1-gauge steel dependingupon shelf spacings. Bin Fronts - op and bottom edges - “Bo Post” Uprights - all posts shall be punched on 1
1 1 1 O.D. curl. Each end - offset to engageupright ’s. in fronts - punched to screw to the front flange of shelves. Labelholder tangs on centers -provided on bin fronts. 1 bin fronts - heavy gauge steel bin fronts wider than shall be heavy gauge. centers to accept eitherclip attachment or bolt attachment. Each upright shall consist of two 1-gauge, hot- rolled, formed steel box posts 1 x 1
11 with two
111 x 1-gauge ladderbraces on uprights of or less. 10 and 1 uprights require three ladder braces. Bases - channel shaped with ends constructed to engage upright ’s and lock inplace with a spring fastener. high base - heavy gauge steel and high bases shall be heavy gauge. Shelf Clips - 1 gauge, hot-rolled, one-piece construction. Four shelf clips usedwith each shelf.NOE: ox post uprights require the use of the Sliding Doors - heavy gauge steel with three heavy gauge horizontal pan rein-forcements on full-height sliding doors and one heavy gauge horizontal pan rein-forcement on above and below ledge sliding doors with built-in pulls and one built-in lock per pair of doors. Sliding doors - suspend and operate from integral ball bearing rollers that run on 1-gauge upper tracks and are contained by 1-gaugelower tracks. Each pair of sliding doors covers two full sections of wide shelv-ing. NOE: Sliding doors are to be used with -post uprights only. 6516 integration clip. Swinging Doors - heavy gauge steel with one full-height heavy gauge pan rein-forcement per door. Each pair of double swinging doors has three point latchingwith one built-in lock. One pair of double swinging doors covers one full section of wide shelving.
Shelves
Medium Duty M Industrial Shelves - -gauge with front and rear ox Wformation. he front and rear ox W formation is not less than 111 x x 1
1 with a
1 return flange spot-welded to bottom surface of the shelf. he portionof the ox W formation shall have a 10-degree bend in the center for additionalstrength and rigidity. he front and rear flanges of the shelf shall be punched to accept bin fronts, label holders and other accessories. Ends are to be flanged not less than 1 Counter ops - 1-gauge steel with cornice formation at front and rear. 1-gauge end finishing strips attached with bolts. Ledges and Ledge ops Seismic Information - Lyon is equipped to handle all seismic requirements.Contact your local Lyon factory representative for specific seismic information relat- ing to your area. - 1-gauge steel with cornice formation at front.Optional 1-gauge end finishing strips attached with bolts. Ledge shelves - 1- gauge with optional Class front flange reinforcements. Ledge shelves - bolted to front flanges of existing shelves and attached to two front upright ’s with 1- gauge shelf clips. NOE: For -post upright only.
11 with a 0-degree return flange of not less than . All cornerslapped and welded. All shelves punched on centers for divider attachment. he front and rear flanges of the shelf are to be embossed with GA. Shelves also punched at corners for bolting to uprights. raditional Industrial Shelves - 1-gauge with front and rear flanged down notless than 1
11 with return flange of not less than at approximately 10 degrees,and punched to accommodate label holder and accessories. Ends are to be flanged not less than 1
11 with a 0-degree return flange of not less than . All cornerslapped and welded. All shelves punched on centers for divider adjustment. he front and rear flanges are to be embossed with 1 GA. Must request punching for bolting to uprights for 1, 1, and . Heavy Duty H Industrial Shelves - 0-gauge with front and rear ox W formation. he front and rear ox W formation is not less than 1