Horizontal Container Pump B200
8Pages

Horizontal Container Pump Lutz B200 Container Emptying: The compact solution For optimum transfer of thin-bodied, light or low viscous liquids New: SafetyBox for leakage detection

Horizontal Container Pump Lutz B200 Different materials for a wide range of applications This very compact pump is an interesting alternative when conventional vertical drum pumps cannot be used e.g. for containers which are stored in shelves. In these cases an access from above is not possible, but the bottom drain of the IBC can be used. For this purpose the new horizontal Lutz B200 is directly connected to the bottom outlet valve. The hydraulic capacity is much higher compared to a hydrostatic outlet. In combination with delivery hose and nozzle, this pump allows a controlled filling and...

Pump Capacities: Similar to the conventional Lutz drum and container pumps, the new pump tube can be combined with various universal and compressed air motors1. This results in different pump capacities. 1 Motors see main catalogue. Typical liquids being pumped □ Thin-bodied mineral oil products EE Emulsions □ Solvents EE Aqueous solutions EE For highly aggressive alkalis and acids EE Vegetable oils EE Cleaning, care and disinfection agents

Pump tube PVDF Technical data: For the container pump Lutz B200 PVDF the following sets/versions are available Comprises of: Pump tube Lutz B200 PVDF Pump tube B200 PVDF 41-R-MS 2 m special chemical hose DN 19 with PVDF connection - Nozzle PVDF - Monitoring module SafetyBox - 5 m power supply cable, 230 V - Ref.-No. Additional price seal kit FFPM/PE *Use motors with low-voltage release, see main catalogue. The union nut enables a quick mounting at the outlet of the container Recommended accessories: Ref.-No. Description 0208-193 Turnbuckle Relieves the outrun piece when using heavy motors...

Technical data: 1The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20°C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The flow rate achievable in use is lower and depends on the individual application, the media properties and the configuration of the pump. The max. delivery head is also dependent on the pump design, motor and medium. Viscosity determined with oil. *Version is not available in Japan The Lutz hand wheel connects motor and pump and allows a...

Product detail Adapter fitting Tri-Clamp (1.4404) DN 32 / G 1 1/4 OT for B200 SS Tri-Clamp locking clamp (1.4404), DN 25/32/40 for B200 SS Tri-Clamp seal EPDM DN 32 for B200 SS 0314-596 FPM DN 32 for B200 SS 0314-597 Check valves SS FPM Clamp DN 32 for B200 SS Mounting bracket B200 Relieves the outrun piece when using heavy motors, if turnbuckle cannot be used Turnbuckle Relieves the outrun piece when using heavy motors Wing nut for outrun piece Stainless steel, thread S60 x 6, seal FPM for B200 SS Stainless steel, thread S60 x 6, seal EPDM for B200 SS PVDF, thread S60 x 6 for B200 PVDF...

Dynamic seals are subject to wear and can lead to leakage The consequences are: • Environmental contamination • Health risk Dynamic seals should be replaced after specified operating times. Since the operating time of mobile pumps is less easy to monitor, there is a higher probability that wearing parts will be used longer than expected. The solution is the SafetyBox monitoring module with which leaks in the mechanical seal can be detected. Benefits: 0 Safe operation 0 Low cost solution 0 Simple installation, can be retrofitted at any time 0 Can also be used for other Lutz drumpumps...

E-Mail: info@lutz-pumpen.de Now to the newsletter and never miss any news!