RPMag62
Electromagnetic Flow meter
.. Suitable for conductive liquids (>5ěS/cm), even with a content of suspended solids
.. Measurement range: from <0.6m3/h to >70000m3/h
.. High accuracy measurement: ±0.2%
.. Power supply options: 85-265vAC or 24vDC
.. IP67 Compact or IP68 Remote mounting options
.. Microprocessor based
controller
.. A wide choice of wetted materials and linings
.. Sizes from DN15 to DN1600
.. Analogue Output 4-20mA
.. Communications Protocol: Modbus or Optional HART
An electromagnetic flow meter consists of a sensor and a transmitter. Working on the principle of Faraday’s
Law, the flow meter measures volumetric flow rate for conductive liquids and pulps. The RPmag62 flow meter
is suitable for use in many industries including chemical, power generation and distribution, mining, water
treatment, pulp and paper, pharmaceutical, food and environmental protection.
The measurement is independent of the density, viscosity, temperature, pressure and conductivity of the
measured fluid. No moving parts are in the measuring tube and there is no pressure loss when using the
RPmag62. Several output signal options are available. The analogue output or frequency output is
proportional to the velocity of fluid. The RPmag62 flow meter has a wide measuring range and is available with
a choice of wetted materials and linings to suit a wide range of applications.
