CMC8 Series Low cost insertion conductivity cells - LTH Electronics - #1

Text version of the page

CMC8 Series of Low Cost Insertion Conductivity Cells The CMC8 series of low cost insertion conductivity cells are ideal for use in small pure water applications where cost and size are the most important factors. The CMC8/001/PT43 insertion conductivity cell is injection moulded in Polypropylene and uses 2 stainless steel coaxial electrodes. The principal advantage of this construction is that sample volume or the proximity of any pipework does not affect the cell constant. The CMC8/001/PT43 conductivity cell has a cell constant of K=0.0135 and is suitable for use on low pressure, low temperature pure water applications. The cell is supplied complete with an integral 2 Metre connection cable and features built in Pt1000 temperature compensation. The CMC8/01 and CMC8/10 insertion conductivity cells are injection moulded in Polypropylene with 2 impregnated carbon electrodes and are supplied complete with either a 2 Metre or 10 Metre integral connection cable. The CMC8/01 and CMC8/10 conductivity cells are Non-temperature compensated cells and can be supplied with a 0.5" BSP tee as the constant is affected by sample volume. The CMC8/01 conductivity cell has a cell constant of K=0.1 and 2 protruding electrodes. The CMC8/10 conductivity cell has a cell constant of K=1.0, flush electrodes and is suitable for conductivity readings up to 1000 mS/cm. The cells require no initial or periodic calibration and the only maintenance required is to keep the electrode surfaces clean. The conductivity cells can be supplied with traceable certification. www.lth.co.uk • Low Cost • Injection Moulded Body • 0.5" BSP Process Connection • Integral Connection Cable