PMAG
4Pages

Catalog excerpts

Electromagnetic Flowmeter Compact digital system, for conductive liquids (>5µS/cm), even with low suspended solid content. Measurement range: from 0.2m3/h to 30000m3/h Typical measurement accuracy: ±0.5% Power supply 85÷265VAC or 24VDC A complete magnetic flowmeter system consists of two components, the Pmag microprocessor-based integral mount magnetic flowmeter transmitter and a flowtube. The flowtube is installed in-line with process piping, either vertically or horizontally. Coils located on opposite sides of the flowtube create a magnetic field, and conductive liquid moving through the magnetic field generates a voltage that is detected by two electrodes. The transmitter controls the generation of the magnetic field and senses the voltage detected by the electrodes. Based on the sensed voltage, the transmitter calculates a flow rate and produces analog and frequency output signals proportional to this fl

Open the catalog to page 1

LTH Electronics www.lth.co.uk Features • Pipe dimension range: DN10 - DN1000. • Measure range: 0.2m3/h - 30000m3/h. • Fluid conductivity: >5pS/cm. • Sensor material: Stainless Steel 321. • Lining materials: PTFE from DN10 to DN32, rubber from DN40 to DN1000. • Housing material: epoxy painted aluminum. • Electrodes materials: SS316, Hastelloy C. • Remote version operating temperature: <80°C. • Compact version operating temperature: -20 - 75°C. • Accuracy: ± 0.5%. • Repeatability: ± 0,1%. • Analog output: 4 - 20mA, max. load 7500. • Communication protocol: Modbus (opt.). • Digital output: 0 -...

Open the catalog to page 2

Flow Tables oeri losses Flow range from DN3 to DN500 (DN10 min. standard) max. 4 Flow range from DN600 to DN2000 m’/h

Open the catalog to page 3

LTH Electronics Ltd, Chaul End Lane, Luton, Bedfordshire, LU4 8EZ, England Telephone: +44 (0) 1582 593693 Fax: +44 (0) 1582 598036 email: sales@lth.co.uk web:www.lth.co.uk Electronics www.lth.co.uk Order Codes Part No. Description Pmag Electromagnetic Flow Measuring System for measuring the flow of conductive fluids in F Remote - 5m. standard cable length, additional cable £7.00 per Metre. DN Flange / Max. Pressure / Lining 0010B2 DN10 / 4,0MPa / PTFE These products comply with current European Directives LTH Electronics Ltd reserves the right to make changes to this data sheet...

Open the catalog to page 4