Catalog excerpts
Features • Designed for dairy, brewing, food and process applications • Two 4-20mA outputs and RS485 interface • 3 line 12 character integral display • Fully configurable operation via Windows™ software • Measurement of conductivity, % solution concentration, salinity & temperature • IP66 stainless steel enclosure • Peek detachable Electrodeless conductivity sensor • Steam sterilisable to 135°c, thermal shock resistant • Fast temperature response t90 < 10 secs • Can be configured and calibrated before shipment • Low cost connection cable • Low voltage operation • Simple installation • A choice of sensor process connections
Open the catalog to page 1The IET40 series of transmitters sets new standards for the measurement of conductivity in process applications. The one unit measures conductivity over the range of 500 us/cm to 1,000ms/cm. Temperature is also measured to an accuracy of better than 0.2°C. The two measurements are combined within the transmitter and using Windows™ software the 4-20mA outputs can be configured to measure in conductivity, % solution concentration, temperature, PPM or salinity. Alternatively a standard RS485 interface provides controlled access to all of the configuration parameters and measurements...
Open the catalog to page 2Output Ranges (Assigned to any of the outputs) Conductivity 0 - 1000mS/cm can be expanded to a minimum conductivity span of 0.2mS/cm and offset anywhere in the measurement range. Can be configured with or without temperature compensation. Specifications Sensor details ECS/56T Insertion 1.5 BSP thread (Not shown) ECS/57T Insertion 1.5 BSP thread (Not shown) ECS/58T Short Hygienic - can be fitted with Varivent Flange (Not shown) ECS/59T Hygienic can be fitted with DIN, triclamp, RJT or IDF flange Wetted materials PEEK, 316 Stainless steel, EPDM Seal Sensor specification Maximum Temperature...
Open the catalog to page 3LTH Electronics Ltd, Chaul End Lane, Luton, Bedfordshire. LU4 8EZ England Telephone: +44 (0)1582 593693 Fax: +44 (0)1582 598036 email: sales@lth.co.uk web: www.lth.co.uk Electronics Specifications (cont.) Total dissolved solids Calculated from the conductivity measurement using an adjustable factor of 0.1 to 10 Temperature -20 to +150°C Temperature compensation Adjustable 0 - 20%/°C, base 20°C or 25°C. Display Integral 3 line 36 character backlit LCD display to show measured values, output currents and error messages. Ambient temp. -20 to +50°C Enclosure IP66 Stainless Steel Power supply 12...
Open the catalog to page 4All LTH Electronics Ltd catalogs and technical brochures
-
RBMAG
4 Pages
-
SGM-200H
2 Pages
-
SGM-101F
2 Pages
-
Flowmeter
2 Pages
-
MXD70 SERIES
20 Pages
-
BXD17 Series
12 Pages
-
LTH Shortform Brochure
9 Pages
-
8000 Series
6 Pages
-
2000 Series
6 Pages
-
ECS40 Series
4 Pages
-
ECS20 Series
4 Pages
-
HD23060
4 Pages
-
CMC7 – CMC8
5 Pages
-
MLC Series
4 Pages
-
Dynaprobe
2 Pages
-
HD23050
4 Pages
-
PG135
3 Pages
-
PME20 WPA1
4 Pages
-
9000
2 Pages
-
ECS40
4 Pages
-
ECS20
4 Pages
-
MTD75
8 Pages
-
MXD70 series
16 Pages
-
CMC7 AND CMC8 SERIES
5 Pages
-
AquaCal 2000
4 Pages
-
S400 pH / Redox Electrodes
4 Pages
Archived catalogs
-
521SMART and 522SMART
2 Pages
-
SWING
2 Pages
-
SMAG62
4 Pages
-
SGM100H
4 Pages
-
SGM100F
4 Pages
-
PTU Series
2 Pages
-
PMAG
4 Pages
-
HET63
4 Pages
-
BC9 Series
3 Pages
-
CDM9
34 Pages
-
LTH Shortform Brochure
16 Pages
-
RPL 50 Series
8 Pages
-
HPT63 pH / Redox Transmitter
4 Pages
-
HOT63
4 Pages