Catalogs >
LTH Electronics Ltd >
HCT63 Contacting Conductivity Transmitter

HCT63 Contacting Conductivity Transmitter
4Pages

Catalog excerpts

HCT63 Contacting Conductivity Transmitter - 1

HCT63 Contacting Conductivity Transmitters The HCT63 Contacting conductivity transmitters combine modern technology with over 38 years of experience in building high quality sensors for liquid analysis to provide a range of competitively priced transmitters to cover a wide range of process applications. www.lth.co.uk • Custom IP66 enclosure • Available as head mounted or Wall mounted versions • Large back lit multifunction display • Displays conductivity, resistivity, ppm and temperature units • Dual isolated 4-20mA & relay outputs • Relays can be configured for on/off, time & pulse proportional • 3 digital inputs to control specific functions • Supplied complete with sensor & ‘T’ piece. (Headmount version only) • Purpose built detachable sensors for easy maintenance • Measured process & temperature can be displayed together • Meets current USP requirements • Full ultra pure water temperature compensation Features • Cable termination via detachable connectors, no need to open enclosure • Low voltage operation 15-30vDC • Simple intuitive programming • On Line multilingual help with text error messages

Open the catalog to page 1

HCT63 Contacting Conductivity Transmitter - 2

Two different options of the HCT63 transmitter will be available with the base model offering a single industry standard 4-20mA output. The Advanced HCT63 will offer two 4-20mA outputs enabling the process temperature to be measured and transmitted as well as either the conductivity or resistivity value. The Advanced HCT63 model will also have 2 relay outputs for process control and also has 3 digital inputs for remote range changing via a plc. Both of the HCT versions are available as head mounted transmitters with purpose built cells which offer cell constants of K=0.01 or 1.0 as well as...

Open the catalog to page 2

HCT63 Contacting Conductivity Transmitter - 3

Specification conductivity sensor Two LTH conductivity cells are available for head-mounting the instrument: CMC64/10/PT43 This has a cell constant of 1.0 and is typically used in wastewater measurement. CMC68/001/PT43 This has a cell constant of 0.01 and is typically used for ultra-pure water measurement. Ranges of measurement 0-0.999 ìS/cm to 0-99.99 mS/cm (K= 0.01 to 1.0) 0-99.99 K.cm to 0-99.99 M.cm (K= 0.01 to 1.0). 0-0.999 ppm to 0-99.99 ppt. (parts per thousand). See the following range/cell constant table. Conductivity accuracy 0.5% of range Linearity 0.1% of range Repeatability 0.1...

Open the catalog to page 3

HCT63 Contacting Conductivity Transmitter - 4

Order Codes Part No Model 1140 HCT63 Wall mounting transmitter complete with mounting kit, single 4-20mA output. 1141 HCT63 Advanced wall mounting transmitter complete with mounting kit, 2 x 4-20mA outputs & 2 x relay outputs. 1134 HCT63 Head mounting transmitter complete with CMC64/10/PT43 conductivity cell & PVC tee piece. Single 4-20mA output. 1136 HCT63 Head mounting transmitter complete with CMC68/001/PT43 conductivity cell & PVC tee piece. Single 4-20mA output. 1135 HCT63 Advanced head mounting transmitter complete with CMC64/10/PT43 conductivity cell & PVC tee piece. 2 x 4-20mA...

Open the catalog to page 4