Catalog excerpts
CMC30 Series Conductivity cells www.lth.co.uk • High quality, robust industrial sensors • IP66 Quick release connector simplifies installation & maintenance • Available with or without built in temperature compensation • Choice of Cell constants 0.01, 0.1, 1.0 & 10.0 Features • Dip, Pipe & Tank mounting options available The CMC30 series of conductivity cells incorporate a quick release IP66 connector that simplifies installation, maintenance and fault finding. The construction of the cells is extremely rugged making the cells suitable for industrial applications. The cells require no initial or periodic calibration and usually the only maintenance required is to ensure the electrode surfaces are kept clean. The CMC32/10, CMC32/100, CMC34/10, CMC34/100 and CMC36/10 conductivity cells consist of 3 Graphite electrodes cast into an epoxy resin body which electrically isolates a precise volume of liquid. This ensures that the measured conductivity is not affected by the sample volume and proximity to pipes or tank walls. The CMC34/001 and CMC34/01 cells have electrodes of Stainless Steel and are intended for use in low conductivity applications. The construction of these cells permit use up to 130°C and 10 bar pressure. All of the conductivity cells can be supplied with cell constant certification if required.
Open the catalog to page 1www.lth.co.uk Cable Assemblies for use with HCT63 Series Transmitters CMC32/10 and CMC32/100 Dip cells Operating Temperature: -5 to 90°C (not freezing) Wetted Materials: Resin impregnated fibreglass or 316 stainless steel stem, epoxy resin cell, internal silicone seal Cell constant: CMC32/10 K = 1.0 CMC32/100 K = 10.0 Temperature compensation: PT1000 as standard* Mounting: 600 or 1200mm dip CMC34/001 and CMC34/01 Insertion cells Operating Temperature: -5 to 130°C (not freezing) Operating Pressure: Vacuum to 10 bar (150 psi). Wetted Materials: 316 stainless steel, Peek, silicone seals Cell...
Open the catalog to page 3LTH Electronics Ltd, Chaul End Lane, Luton, Bedfordshire. LU4 8EZ England Telephone: +44 (0)1582 593693 Fax: +44 (0)1582 598036 email: sales@lth.co.uk web: www.lth.co.uk LTH Electronics Ltd reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued developments and improvements. All care has been taken to ensure the accuracy of information contained in this data sheet. However we cannot accept responsibility for any errors or damages resulting from errors or inaccuracies of information contained herein. Issue: 0908 These products...
Open the catalog to page 4All LTH Electronics Ltd catalogs and technical brochures
-
RBMAG
4 Pages
-
SGM-200H
2 Pages
-
SGM-101F
2 Pages
-
Flowmeter
2 Pages
-
MXD70 SERIES
20 Pages
-
BXD17 Series
12 Pages
-
LTH Shortform Brochure
9 Pages
-
8000 Series
6 Pages
-
2000 Series
6 Pages
-
IET40
4 Pages
-
ECS40 Series
4 Pages
-
ECS20 Series
4 Pages
-
HD23060
4 Pages
-
CMC7 – CMC8
5 Pages
-
MLC Series
4 Pages
-
Dynaprobe
2 Pages
-
HD23050
4 Pages
-
PG135
3 Pages
-
PME20 WPA1
4 Pages
-
9000
2 Pages
-
ECS40
4 Pages
-
ECS20
4 Pages
-
MTD75
8 Pages
-
MXD70 series
16 Pages
-
CMC7 AND CMC8 SERIES
5 Pages
-
AquaCal 2000
4 Pages
-
S400 pH / Redox Electrodes
4 Pages
Archived catalogs
-
521SMART and 522SMART
2 Pages
-
SWING
2 Pages
-
SMAG62
4 Pages
-
SGM100H
4 Pages
-
SGM100F
4 Pages
-
PTU Series
2 Pages
-
PMAG
4 Pages
-
HET63
4 Pages
-
BC9 Series
3 Pages
-
CDM9
34 Pages
-
LTH Shortform Brochure
16 Pages
-
RPL 50 Series
8 Pages
-
HPT63 pH / Redox Transmitter
4 Pages
-
HOT63
4 Pages