Catalogs >
LTH Electronics Ltd >
9000 Series Insertion pH / Redox Electrodes

9000 Series Insertion pH / Redox Electrodes
2Pages

Catalog excerpts

9000 Series Insertion pH / Redox Electrodes - 1

9000 Series pH & Redox Insertion Sensors • Combination glass pH electrode, • Sealed Ag/AgCl reference with coaxial ceramic junction • Single junction reference design • 6 Metres of cable with Tag ends (* Note: Dimensions in inches) The 9000 series pH & Redox sensors are designed for direct installation into a pipe or in the wall of a tank for continuous pH or Redox monitoring and control. These sensors have a large non-clogging peripheral reference junction, which is constructed in annular form around the sensing electrode. The 9000 series sensors have a Kynar body with a 0.5” NPT male threaded process connection. The sensors must always be installed at least 15 ° above horizontal for correct operation.

Open the catalog to page 1

9000 Series Insertion pH / Redox Electrodes - 2

SPECIFICATIONS pH Range 0–13 pH ORP Range ± 5000 mV Temp Range -5º to 105ºC Max Pressure/Temp 100 psig at 100ºC, 150 psig at 25ºC Reference System Ag/AgCl Reference Electrolyte 3.8M KCl, Saturated with AgCl Glass Membrane Type HT-3, Low Sodium Ion error Membrane Resistance 100 Megohms Zero Potential 7.0 pH Wetted Materials Kynar, Glass and Ceramic Standard cable length 6 Metres low noise coaxial cable with Tag ends Order Codes Type No Part No Description 9027 138/007 0.5” NPT Male threaded pH sensor fitted with 6 metres of cable & Tag ends (Body colour Orange) 9126 138/054 0.5” NPT Male...

Open the catalog to page 2