video corpo

Electroless Metallization of 3D Interconnect Devices with LPKF ProtoPlate
4Pages

{{requestButtons}}

Catalog excerpts

Electroless Metallization of 3D Interconnect Devices with LPKF ProtoPlate - 1

Electroless Metallization of 3D Interconnect Devices with LPKF ProtoPlate Laser & Electronics

Open the catalog to page 1
Electroless Metallization of 3D Interconnect Devices with LPKF ProtoPlate - 2

Metallizing Circuit Tracks with LPKF ProtoPlate Demand for the laser direct structuring (LDS) process has risen dramatically thanks to its simple and economic production process. With ProtoPlate, LPKF closes a gap in prototyping three-dimensional molded interconnect devices. With laser direct structuring, a laser beam applies circuit tracks onto a three-dimensional plastic component. Copper and other metal layers are then deposited on these tracks in an electroless process. For end products, the copper layer is protected against environmental influences with a razor-thin nickel and gold...

Open the catalog to page 2
Electroless Metallization of 3D Interconnect Devices with LPKF ProtoPlate - 3

• No chemical knowledge required • Metallization in 4 easy steps • Production-level layer thicknesses 1. Pour the copper solution into the beaker 2. Pour in the activator to start the metallization bath 3. Immerse the part in the bath 4. Rinse the part – and the part is ready ProtoPlate considerably reduces the effort for part metallization, which can now be carried out in your own laboratory without any appreciable chemical knowledge. The LPKF ProtoPlate basic package consists of an integrated processing cell, beaker, magnetic stirrer, temperature monitor and internal air filtering. The...

Open the catalog to page 3
Electroless Metallization of 3D Interconnect Devices with LPKF ProtoPlate - 4

Technical Data: LPKF ProtoPlate Enclosure size (W x H x D) Power supply Power input Ambient temperature Chemical set CU* Can be stored unopened for one year Storage temperature of chemicals * For further details, see chemical safety data sheets and user manual low foam depth low selectivity high foam depth high selectivity Layer thickness depends on exposure time LPKF Laser & Electronics AG Osteriede 7 30827 Garbsen Germany LPKF Laser & Electronics K.K. Japan Phone +49 (5131) 7095-0 info@lpkf.com www.lpkf.com North / Central America South Korea LPKF Laser & Electronics North America LPKF...

Open the catalog to page 4

All LPKF Laser & Electronics catalogs and technical brochures

  1. 1000 S

    4 Pages

  2. SL P 6060

    4 Pages

  3. SL G 6080

    8 Pages

  4. 1522

    2 Pages

  5. 1523

    2 Pages

  6. 1535

    2 Pages

  7. 1532-dse-200

    2 Pages

  8. 1520-fcbis

    2 Pages

  9. 1518

    2 Pages

  10. 1521-apos

    2 Pages

  11. 1530

    2 Pages

  12. LPKF PROSYS

    2 Pages

  13. Apos

    2 Pages

  14. QuickMeasure

    2 Pages

  15. FCBIS

    2 Pages

  16. DSE 200

    2 Pages

  17. z-φ 2/190

    2 Pages

  18. LPKF MagnoTM

    2 Pages

  19. catalog

    132 Pages

Archived catalogs