SOFT STARTERS - LOVATO ELECTRIC - #5

Text version of the page

Soft starters Remote keypad and accessories for ADX... types Remote keypad for ADX... types Order code Description Qty per pkg Wt n° [kg] 51 ADX TAST Remote keypad 96x96mm, 2x16 backlit LCD, 208-240VAC supply c/w 3m/10ft long connecting cable 1 0.350 51 C2 PC <- ADX connecting cable, 1.8m/6ft long 0.090 51 C3 PC <- GSM modem connecting cable, 1.8m/6ft long© 0.210 51 C4 PC <- 4 PX1 converter drive connecting cable, 1.8m/6ft long 0.147 51 C5 ADX Analog modem connecting cable, 1.8m/6ft long© 0.111 51 C6 ADX <- 4 PX1 converter drive connecting cable, 1.8m/6ft long 0.102 51 C7 ADX <- GSM modem "FUNK-ANLAGEN" © connecting cable, 1.8m/6ft long 0.101 51 C8 ADX remote keypad connecting cable, 3m/10ft long 0.081 4 PX1 RS232/RS485 converter drive, opto-isolated, 220-240VAC© 0.600 31 PA 96X96 Protective cover (IP54) 0.077 General characteristics The flush-mount ADX TAST remote keypad is identical to the one on board the soft starter except for the start and stop controls of the motor, which are permanently disabled. With this keypad, starter setup can be conducted, motor readings and operating data displayed and data and parameter transfer (ADX <- remote keypad) made, as well. A backup copy of the starter data and parameter setup is obtainable with the transfer functions. In this way, quick and easy setup operations can be done especially with machines assembled in series. The baud transmission rate, the contrast and backlight can also be adjusted by this keypad. It is supplied standard with a 3 metre long cable and suitable connectors to complete the link to the ADX RS485 port. The three terminals of the keypad supply are removable. For longer distances, this keypad can be connected to the ADX RS232 port via RS232/RS485 converter. Advantages - Flush mount - Messages in selectable language - Readings display - Parameter setup - Two-way data and parameter transfer. Operational characteristics - Auxiliary supply voltage: 208-240VAC ±10% - Power consumption: 6.9VA - Dissipation: 3.2W - Mains frequency: 50/60Hz - RS-485 port: RJ 4/4 connector - Supply: Removable 3-pole 2.5 mm2 terminal block. - Display: 2 line, 16 character backlit LCD - LED indication (3): POWER, RUN and FAULT - Keys (6) ENTER/START, RESET/STOP, .-PREVIOUS, NEXTfi, t and s - Ambient condition • Operating temperature: -10...+60°C • Storage temperature: -20...+70°C - Flush mount enclosure - Degree of protection on front: IP41; IP54 with protective cover. Certifications and compliance Certifications obtained: GOST. Compliant to standards: IEC/EN 61000-6-1 and IEC/EN 61000-6-3 for 4 PX1 types. Accessories for ADX... types 51C4 4PX1 © Consult Customer Service for modem details; see contact details on inside front cover. © RS232/RS485 opto-isolated converter drive, 38,400 Baud-rate maximum, automatic or manual TRANSMIT line supervision, 220...240VAC ±10% supply (110-120VAC available on request). Dimensions page 5-7 5-