| General characteristics The LOVATO ELECTRIC limit switches have been designed to satisfy requirements comprising quick installation, wiring ease, simple setup, modularity, sturdiness and constant reliability. The body cover is hinged at the bottom and removable. The innovative locking bayonet mechanism consents to remove and reposition the operating head in the required configuration with no tools. The heads have axial rotation of 180° angles. The auxiliary contact blocks are removable assuring remarkable wiring simplicity. Operational characteristics - Maximum operating rate: 3600 cycles/h - Switching time: 0.5-1.5m/s - Mechanical life: >10 million cycles - Rated thermal current Ith: 10A - Designation to IEC/EN 60947-5-1: • A600 Q300 for KC types • A300 Q300 for KN types - Conventional insulation voltage Ui: • 690VAC for KC types • 440VAC for KN types - Rated impulse withstand voltage Uimp: • 6kV for KC types • 4kV for KN types - Class II insulation for KC only - Contact resistance: <10mQ - Short-circuit backup protection: 10A gG quick fuse - Cable connection: Self-releasing screw terminal - Degree of protection: • IP20 for terminals • IP65 for body housing - Operators of aluminium-zinc alloy - Housing: • KC types - Self-extinguishing double-insulation polymer thermoplastic • KN types - Aluminium-zinc alloy - Cable entry: M20 standard supplied; PG13.5 available (see the side note for details) - Operating head fixing: Locking bayonet insert - Operating force: 3Ncm - Tightening torque for switch fixing: 2.5Nm - Ambient conditions: • Operating temperature: -25 ... +70°C • Storage temperature: -40 ... +70°C • Suitable for ambient pollution degree: 3. Certifications and compliance Certifications obtained: cULus, GOST. Compliant with standards: EN 50047, IEC/EN 60947-1, IEC/EN 60947-5-1, IEC/EN 60204-1. |