AC MOTOR DRIVES - LOVATO ELECTRIC - #5

Text version of the page

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:4.80pt "Arial", sans-serif; } .font2 { font:5.00pt "Arial", sans-serif; } .font3 { font:5.60pt "Arial", sans-serif; } .font4 { font:7.00pt "Arial", sans-serif; } .font5 { font:10.00pt "Arial", sans-serif; } .font6 { font:12.00pt "Arial", sans-serif; } .font7 { font:21.00pt "Impact", sans-serif; } .font8 { font:13.00pt "Palatino Linotype", serif; } .font9 { font:6.00pt "Tahoma", sans-serif; } AC motor drives ilectric VFPS1 three-phase type Order code Ie O 3-phase motor power at 400V Qty per pkg Weight [A] [kW] [HP] n° [kg] Three-phase supply ©. EMC suppressor built in. VFPS1 4185PL WP 41 18.5 25 22.200 VFPS1 4220PL WP 48 22 30 23.700 VFPS1 4300PL WP 66 30 40 32.500 VFPS1 4370PL WP 79 37 50 32.800 VFPS1 4450PL WP 94 45 60 54.000 VFPS1 4550PL WP 116 55 75 54.000 VFPS1 4750PL WP 160 75 100 54.000 VFPS1 4900PC WP 179 90 125 100.000 VFPS1 4110KPC WP 215 110 150 100.000 VFPS1 4132KPC WP 259 132 200 108.000 VFPS1 4160KPC WP 314 160 250 118.000 VFPS1 4220KPC WP 427 220 350 161.000 VFPS1 4250KPC WP 481 250 400 194.000 VFPS1 4280KPC WP 550 280 450 204.000 VFPS1 4315KPC WP 616 315 500 204.000 VFPS1 4400KPC WP 759 400 600 302.000 VFPS1 4500KPC WP 941 500 700 320.000 VFPS1 4630KPC WP 1181 630 1000 462.000 General characteristics VFPS1 is a motor drive combining the most advanced and optimised mode for energy saving with a new more-compact and complete line as well as a new function software dedicated to pump and fan applications. The on-board EMC surge suppressor and standard-supplied (up to 315kW type) DC inductance consent to radically reduce harmonic distortions and noise disturbances generated by the motor drive and to limit the input current to a maximum value of 1.1 times output current. QUICK mode provides for a customised menu of 32 specific parameters for a single application, inhibiting access to all the other parameters. SPEED REFERENCE SIGNALS Reference signals for speed adjustment are obtained by: - External potentiometer: 1-10kQ - Voltage signal: 0-10V or -10 to +10V - Current signal: 4-20mA or 0-20mA - Keypad on front - Remote keypad option - 15 preset speeds via digital inputs - RS485 serial signals. PROGRAMMABLE INPUTS - Selectable PNP or NPN I/O logic - 6 digital multifunction inputs - 1 digital configurable as analog input. PROGRAMMABLE OUTPUTS - 1 relay with changeover contact - 2 static - 2 analog configurable as 0-10VDC, 0-20mA or 4-20mA - 1 pulse train. PROTECTIONS - Overcurrent and overvoltage - Output short circuit and earth leakage - Drive, motor and braking resistor overload - Drive overtemperature - Motor stall - Too low torque. SPECIAL FUNCTIONS - PID function for pump and fan application - Dual set of independent parameters and ramps for two different motor controls - Automatic restarting and instantaneous speed tuning - 15 viewable frequency values - DC-Bus access for DC power supply - Built-in DC reactor for reduced harmonic content at input - DC braking board standard-supplied up to 220kW/350HP rating; optional external braking resistors - DC injection at starting - Motor control: constant torque V/f, variable torque, torque boost with automatic starting, sensorless vector, vector control in closed-loop conditions - Auto-tuning - Frequency potentiometer; speed adjustment via 2 external push buttons - SLEEP function: automatic motor stopping after continuous running at minimum frequency - FIRE control function: specified speed maintained even in alarm conditions - Built-in PTC thermistor input. Operational characteristics - Output voltage: s input voltage - Rated operational current Ie: 41 to 1181A - Mains voltage: 50/60Hz ±5% - Output frequency: 0.5-500Hz - Frequency modulation: 1-16kHz - Current overload: 120% for 60s, 135% for 2s - IEC degree of protection: IP00 for all except VFPS1 4185PL WP with IP20; IP55 on request - Ambient conditions: • Operating temperature: -10...+60°C • Maximum altitude: 1000m without derating; up to 3000m with derating • Relative humidity: 20-93% (with no condensing). Certifications and compliance Certifications obtained: UL Listed for USA and Canada (File E204788) as Power Conversion Equipment; CSA certified for Canada (File 231252) as Motor Controllers - Miscellaneous; AS C-tick. Compliant with standards: IEC/EN 61800-5-1, IEC/EN 61800-3 - first environment cat. C2 or second environment cat. C3, UL508, CSA C22.2 n° 14. VFPS1... O Operation up to 50°C without derating. © Three-phase supply voltage 380...480VAC 50/60Hz for 18.5 to 110kW types. Three-phase supply voltage 380...440VAC 50Hz / 380...480VAC 60Hz for 132 to 630kW types. > VFPS1... \ M Accessories page 6-5 Dimensions page 6-7