GM80
2Pages

{{requestButtons}}

Catalog excerpts

GM80 - 1

O Data Logger for over 15000 Measurements O Mains-, Battery-, Accumulator Operation Q Trigger Input for External Controlling O Fast Measurement up to 1000/s O Display of the Physical Unit O Active or Passive Sensors O 10 Sensor Parameter Sets O Min.-Max. Memory O RS232-Interface O Time and Date O USB-Interface Description The measuring amplifier can process sensor strain gauge (SG) signals of ±3,3 mV/V and active signals of±10V and 0/4 .. 20 mA. Through its battery and/or accumulator operation, the GM80 is mobile applicable, but can also be supplied with an external power pack. High measuring accuracy, paired with a fast measuring rate is ensured by using highly precise amplifiers and components, a 16 Bit A/D converter and a fast ^-controller. The versatile configurable data logger can store a series of measurements with date and up to 15288 measured values. The output of measured values or log values to a computer or a printer can be optionally carried out through the USB- or the RS232-Interface. 10 parameter sets are available for sensors. The adjustment data, the sensor designation and the physical unit are stored here. Functions, such as tare, recall of min.-max. and/or delete min.-max. are available during the measurement. Through the additional trigger input, the data logger or the interface can be actuated externally. If the GM80 is not in the measuring mode, the device will automatically switch-off after 3 minutes. Also, at low measuring rates, the SG-supply is clocked power-saving. Option/ Accessories Art.-No. E-Mail: info@lorenz-sensors.com Technical changes under reserve Internet: www.lorenz-sensors.com

Open the catalog to page 1
GM80 - 2

O Comfortable Configuration and Evaluation Software O Graphical Presentation O Automatic Scaling of Y-axis O Reading of the Data logger O Automatic Storage of the Measured Values as CSV or BMP-File Description Configuration and evaluation software for analysis and graphical presentation on a PC. The software allows direct read-in of measured data into a text file in CSV-Format through the USB- or a RS232 port of a PC. This enables further analyses with a commercially available spreadsheet program at any time. E-Mail: info@lorenz-sensors.com Internet: www.lorenz-sensors.com Technical changes...

Open the catalog to page 2

All Lorenz Messtechnik catalogs and technical brochures

  1. GM41-NT

    2 Pages

  2. PAX-LC-TG

    1 Pages

  3. DD-2002

    3 Pages

  4. GM80-PA

    2 Pages

  5. PAX

    2 Pages

  6. PAX-DP

    1 Pages

  7. GM77

    1 Pages

  8. ALMEMO® 202

    7 Pages

  9. K-1563

    2 Pages

  10. K-100

    2 Pages

  11. DR-20

    5 Pages

  12. D-2431

    3 Pages

  13. K-1107

    2 Pages

  14. DR-1

    5 Pages

  15. DR-2

    4 Pages

  16. DV-14

    3 Pages

  17. DK-15

    3 Pages