Catalogs >
LM REALISATIONS >
CPUC RANGE

CPUC RANGE
2Pages

Catalog excerpts

Designer Manufacturer CPUC RANGE ~\ Protective enclosure for CPU General characteristics: • Made from 5 PVC panels: sides, base, top and rear; • 10 mm thick composite panels; • Enclosure protecting the CPU against shocks and dust; • The enclosure can be used vertically (TOWER) or horizontally (FLAT). Sides: • Two inlet grilles equipped with filters to trap the dust. Rear panel: • Removable panel for handling and making the CPU connections; • 80 mm diameter cable port; • An ECA, fan placed behind a grille, attached to the rear panel; • The CPU is powered up when the enclosure (fan) is switched on via a switch; VENTILATION: The ventilation and suction systems are used to: • Suck, filter and pressurise the inner volume; • Discharge air when opening the enclosure, which creates a barrier preventing dust from entering. Front panel: • 6 mm thick transparent PMMA CPU access door; • Front panel closes with a latch onto seals. Advantages: • Ergonomic enclosure CPUC with CASTERS option

Open the catalog to page 1

Fixed andConcepteur Fabricant mobile workstations The protection system for your CPUs LOCK option • Lock with key to protect the CPU • pening cable gland system to feed cables O without having to remove the connectors; • he cable gland consists of two sections which hold the cables in the seals; T • enerally fitted on the removable rear panel. G CASTERS option • Four 50 mm diameter casters, 2 with brakes • Allows easy movement of the enclosure. PRESSURE REDUCER option • he enclosure is connected to the dry air network via a pressure reducer to T pressurise the enclosure and prevent the...

Open the catalog to page 2