You may also be interested in
Wastewater pump, Gear pump, Pump, Self-priming pump, Submersible pump
Text version of the page
Linn-Pumpen GmbHDIWA DIWASchmutzwassertauchpumpen Submersible Pumps for dirty water Die Tauchpumpen für Schmutzwasser sind vollständig aus Edelstahl 1.4301 und verfügen über eine Gleitringdichtung mit Ölkammer.Erhältlich sind 4 Baugrössen mit Nennleistungen von 0,55 kW bis 1,5 kW. Leicht und Kompakt Motorkühlung durch das Medium Laufradabdeckung mit Polyurethanbeschichtung Submersible pumps for dirty water manufactured in AISI 304 stainless steel. Head up to 20 metres, delivery up to 425 l/min (25,2 m3/h). Four basic models with 0.55 (0.75 HP) to 1.5 kW (2HP) rated power. Motor cooled by pumped liquid diffuser plate coated with Polyurethane for maximum resistance to abrasion compact and lightweight Anwendungsbereiche Applications - Entleerung von Sammeltanks für: Regenwasser, Sickerwasser oder Haushaltsabwasser - Entleerung von Kellern, Garagen und Räumen bei Überflutung- Förderung von Brauchwasser - Draining of cellars, garages, basements.- Draining of construction sites.- Emptying of tanks and reservoirs.- Lawn and garden irrigation.- Fountains.- Pumping of domestic wastewater (washing machines, showers, Technische Daten - Fördermenge bis zu 425 l/min (25,5 m3/h)- Förderhöhe bis zu 20 m- Max. Temperatur des Fördermediums: +50°C- Offenes Laufrad Sinks).- Emptying of tanks in industrial and ecological Applications. Specifications - Mindestpegel des Fördermediums: 25 mm- Max. Korngröße: 8 mm- Max. Eintauchtiefe: 7 m- 10 m Anschluskabel Typ HO7RN-F- Motor mit Trockenwicklung - Liquid temperature up to 50°C.- Open impeller.- Minimum level of pumped liquid: 25 mm.- Suspended solids handled up to 8 mm.- Maximum immersion depth: 7m.- 10 meters of HO7RN-F type neoprene power cord.- Dry motor (class Versionen: F insulation).- IP 68 protection. - Wechselstromausführung: 220 - 240 V, 50 Hz, Leistungen von 0,55 bis 1,1 kW- Drehstromausführung: 380 - 415 V, 50 Hz, 2polig, Leistungen von 0,55 Versions: bis 1,5 kW- Ausstattung der Wechselstromversion:- Vormontierter Schwimmerschalter- Integrierter Kondensator (ausgenommen DIWA 11 - Schaltgerät am Kabel)- Überlastschutz- Versionen für 60 Hz-Betrieb oder ohne Schwimmerschalter (SG) auf Anfrage- Isolationsklasse: F- Schutzart: IP68 Single-phase 220-240 V 50 Hz 2 poles with built-in overload protection.Three-phase 380-415 V 50 Hz 2 poles. Motor power: - 0.55 to 1.1 kW for single-phase version.- 0.55 to 1.5 kW for three-phase version.- The single-phase versions feature:Pre-assembled float (version without float available on request).Built-in capacitor (except for DIWA 11 model with control box on cable).Thermal overload protection.- 60 Hz and versions without float (SG) available. Dichtungssystem DRIVELUB SEAL DRIVELUB SEAL SYSTEM Der Elektromotor wird durch ein Mehrfachdichtungssystem mit integrierter Ölkammer geschützt. Watertight electric motor protected by multiple seal system with oil chamber. A V-ring and silicon carbide mechanical seal (extremely resistant to wear and abrasion), as Der V-Ring, die Gleitringdichtung ausSiliziumkarbid (extrem widerstandsfähig gegen Abrieb und Verschleiss) und die Lippendichtung garantieren einen sicheren und dauerhaftenPumpenbetrieb. well as a lip seal which is continuously lubricated by the DRIVELUB system, provide an extremely efficient barrier against infiltration. Bauteile Werkstoffe Part Material Pumpengehäuse, Motorgehäuse, Außengehäuse, Laufrad, Wellenende Einlaufsieb, Schrauben und Bolzen Edelstahl1.4301 Pump body, Motor casing, Outer sleeves, Impeller, Shaft extensions, Suction screen, Nuts and Bolts Stainless steel (AISI 304 - DIN 1.4301) Frontal-Ausgleichsscheibe Schleißdeckel Edelstahl 1.4301 mit Polyurethan-Elastomer beschichtet Stainless steel (AISI 304 - DIN 1.4301) Front diffuser platecoated with Polyurethane Elastomere Gleitringdichtung mediumseitig Siliziumkarbid / Siliziumkarbid Inner mechanical seal Silicon carbide / Silicon carbide Lippendichtung motorseitig NBR Upper lip seal, Elastomers Nitrile rubber Edelstahl 1.4301mit Polyazetat-Harz beschichtet Stainless steel (AISI 304 - DIN 1.4301)coated with Polyacetat resins Griff Handle |
|