self-priming centrifugal pump - Linn-Pumpen - #1

/ 2


catalogue search
self-priming centrifugal pump - Linn-Pumpen
P. 01
self-priming centrifugal pump - Linn-Pumpen
P. 02
Pages:
self-priming centrifugal pump - Linn-Pumpen


See other catalogues for Linn-Pumpen

Text version of the page
Gewerbering 15 D-58579 Schalksmühle Telefon: +49 (0)2355-902929 Telefax: +49 (0)2355-902999
CA
CA
Ausführung
Selbstansaugende Flüssigkeitsringpumpe mit Sternrad in Blockbauweise. Einsatzgebiete
-Für reine nicht-explosive Flüssigkeiten, ohne abrasive Bestandteile, ohne
Schwebestoffe, die die Pumpenbaustoffe nicht angreifen. -Zur Förderung von Flüssigkeiten mit Luft oder Gasen oder wenn an der
Saugseite kurzzeitig Flüssigkeitsmagel möglich ist.
-Zur Wasserversorgung, wenn Wasser aus einem Brunnen oder einer Quelle entnommen werden kann.
-Zur Druckerhöhung des Wassernetzes (örtliche Vorschriften beachten).
Einsatzbedingungen Mediumstemperatur bis 90°C. Umgebungstemperatur bis 40°C. Vakuumetrische Saughöhe bis 9m. Dauerbetrieb.
Motor
2-poliger Induktionsmotor, 50Hz (n=2900 1/min). CA:dreiphasig 230/400V ± 10% (220-240/380-415 V). CAM:einphasig 230V ± 10%, (220-240 V), mit Thermoschalter. Anlaufkondensator im Klemmkasten. Isolationsklasse F. Schutzart IP 54. Ausführung nach: IEC 34;
Sonderausführungen auf Anfrage -Andere Spannung. -Frequenz 60Hz. -Schutzart IP 55. -Andere Gleitringdichtung.
-Höhere Mediums- oder Umgebungstemperaturen.
Gewährleistung
12 Monate Garantie (im Rahmen unserer Lieferbedingungen).
Construction
Close-coupled self-priming liquid ring pumps with star impeller.
Applications
- If the liquid to be pumped has entrained air or gas or the flow in
non-aggressive for the pump materials.
- For clean liquids without abrasives, without suspended solids, non-explosive,
the suction pipe is not stable.
- For drawing water out of a well.
- For increasing network pressure (follow local specifications).
Operating Conditions
Liquid temperature from -10° C to +90° C.
Ambient temperature up to 40° C.
Negative suction pressure up to 9 m. Continuous duty.
Motor
2-pole induction motor, 50 Hz (n = 2900 rpm).
CA:three-phase 230/400 V ± 10%.
CAM:single-phase 230 V ± 10%, with thermal protector.
Capacitor inside the terminal box. Insulation class F. Protection IP 54.
Constructed in accordance with IEC 34.
Special features on request
- Other voltages.
- Frequency 60 Hz (as per 60 Hz data sheet).
- Protection IP 55.
- Special mechanical seal
- Higher or lower liquid or ambient temperatures.
Warranty
One year (as per our general sales conditions).
Werkstoffe
Materials
Teile-Benennung
CA
B-CA
Pumpengehäuse Laterne
Grauguß GJL200 EN 1561
Bronze G-Cu Sn 10 UNI 7013
Laufrad
Messing P- Cu Zn 40 Pb 2 UNI 5705
Welle
Chrom-Stahl 1.4104 EN 10088 (AISI 430)
Cr-Ni-Mo Stahl 1.4401 EN 10088 (AISI 316)
Gleitringdichtung
Kohle - Keramik - NBR
Components
CA
B-CA
Pump casing Lantern bracket
Cast iron GJL 200 EN 1561
Bronze G-Cu Sn 10 UNI 7013
Impeller
Brass P- Cu Zn Pb 2 UNI 5705
Shaft
Chrome steel AISI 430
Cr-Ni-Mo steel AISI 316
Mechanical seal
Carbon - Ceramic - NBR
Kennlinien und Kenndaten
Characteristic Curves and Performance
0 5 US. g.p.m.
2 3 4 5
10
0.5 Imp. g.p.m.
2 3 4 5
10
60
CA 91E
CA 90E
CA
CA 60E
40
100
20
50
0
0
0.1
0.5
2
3
50
m3/h
Q
l/min
2
20
30
40

pageCatalog pdf di En 2012-02-07-16