T H E L AT E S T P R O D U C T S A N D N E W S F O R L I N C O L N C U S T O M E R S SOLUTIONS MAY 2005 VOL. 6, NO. 4 The New SL-V XL High-Output Injector Lincoln’s Newest Member of the SL-V Injector Family Increases Output and Significantly Lowers Installation Cost All of the features and benefits of the standard SL-V plus the ability to mount in the same manifolds as the SL-V and SL-1 injectors Two SL-V XL injectors provide 22% more output than one SL-11 One SL-V XL can replace more than three standard output injectors Longer life for trouble-free performance TWO YEAR WARRANTY

Benefits of the SL-V XL Versatility Two cross-ported SL-V XL injectors can deliver 22% more output than one standard high-output injector, plus installation is quicker and easier because of manifold mounting. Manifold mounting means greater flexibility because SL-V XL injectors can be installed along with, or in place of, SL-1 and SL-V injectors. This flexibility gives the user a choice to upgrade their systems all at once or as individual injectors are replaced. Additionally, the output of one SL-V XL injector is more than three times than that of a single standard injector, significantly reducing...

Increase Your System’s Performance With Patented SL-V Technology Visual Bypass Indicator The visual bypass indicator alerts maintenance personnel when an internal seal is failing and needs replacement, saving costs and expensive downtime. Clear Polycarbonate Protective Cap The water-tight, clear polycarbonate cap on the SL-V XL injector is O-ring sealed, UV resistant, and keeps abrasive dirt and dust away from the cycle pin indicator while allowing a fast confirmation of injector performance. Use Thicker Lubricants Higher viscosity lubricants are almost always preferred for lubrication systems....

Technical Specifications 11/4" (32mm) 13/16" (30mm) 113/16" (284mm) 1 8" / NPTF 3/4" 103/16" (248mm) 13/32" (10.3mm) Mounting Holes (19mm) 21/8" (54mm) 1 8" / NPTF 3/8" NPTF (both ends) 3/8" NPTF A B 11/2" (38mm) 13/8" (35mm) 85780-3 85782 85781 Specifications: Output in3 (cc) Series SL-V XL Carbon Steel Operating Pressure Connections Manifold Injector Inlet Outlet 3/8" 1/8" NPTF(F) NPTF(F) Material Min 0.015 (0.25) Max 0.305 (5.00) Min 1850 psig 128 bar Max 6000 psig 413 bar Typical 2500 psig 172 bar Vent 1000 psig 69 bar Note: Two SL-V XL Injectors are required to replace one SL-11 Injector...