Catalogs >
Lincoln Electric >
Power Wave® S700

Power Wave® S700
8Pages

Catalog excerpts

ADVANCED PROCESS WELDERS Processes Stick, TIG, MIG, Pulsed MIG, Flux-Cored, Tandem MIG®, Carbon Arc Gouging Product Number K3279-1 Power Wave® S700 Flexible Configuration. Endless Possibilities. Choose the Power Wave S700 model for high amperage, high duty cycle applications in the heavy equipment, transportation and other fabrication industries. Typically recommended for 1/16 inch (1.6 mm) wire diameter and up, the Power Wave® S700 can be used in semiautomatic, hard automation or robotic environments – even for high deposition synchronized tandem welding applications. The machine is also suitable for arc gouging. ® Rated Output (60Hz) GMAW: 700A/44V/100% GMAW: 900A/44V/60% Input Current @ Rated Output (60Hz) 3 Ph / 100% Duty Cycle: 55/46/42/38 APPLICATIONS Semiautomatic Automation Hard Automation Heavy Equipment Transportation Fabrication FEATURES Wide Input Voltage Range – Set up operations almost anywhere (380-575 VAC, 3 phase, 50/60Hz voltage). Shown: K3279-1 Power Wave S700 Add AutoDrive 19 Tandem modules to ® Operating Cost – Operates at a high Low 88% efficiency with a 95% minimum power factor (at rated output). Severe Duty – Can be stored outdoors. IP23 rated to withstand harsh environments. iARC™ Digital Control – 90 times faster than the previous generation, delivering a responsive arc. Standard ArcLink®, Ethernet, and True Energy™ – Measures, calculates and displays instantaneous energy in the weld for critical heat input calculations. Checkpoint™ – A cloud-based data collection tool allows customers to view and analyze welding data on almost any device – desktop, laptop, iPhone® or iPad®, Blackberry® and others. Track equipment usage, store weld data, configure fault limits and more. consumption and the amount of debris that gets drawn into the machine by shutting the fan down when it is not needed. Standard 115V (10A) AC Duplex Auxiliary Power Receptacle - Features patent pending Surge Blocker™ Technology to ensure simultaneous welding performance is not compromised by high starting current devices such as grinders (typically requiring 60A or more peak surge current). UNIT REQUIRES CE Filter for CE Territory Operations. Recommended semiautomatic wire feeders: Power Feed® 84 Bench and Boom, Power Feed® 25M. Recommended automatic and robotic wire feeders and controllers: Power Feed® 10R, AutoDrive® 19, AutoDrive® 19 Tandem, AutoDrive® 4R220. THE LINCOLN ELECTRIC COMPANY Publication E5.120 | Issue D te 03/14 a © Lincoln Global, Inc. All Rights Reserved. 22801 St. Clair Avenue • Cleveland, OH U.S.A. • 44117-1199 PH: +1.216-481-8100 • www.lincolnelectric.com DeviceNet™ Communication – Offers remote process monitoring, control and troubleshooting. FEATURES, CONT’D. Fan-As-Needed™ (F.A.N.) - Reduces power access waveform modes specifically designed for Synchronized Tandem MIG multi-arc applications. A sync connection is provided for easy tandem power source operation. Two Year Extended Warranty Available in the U.S.A. and Canada.

Open the catalog to page 1

6 FRONT 1. Power Switch: 0n/Off 2. Status LED 3. Thermal Indicator LED 4. Access Panel 5. Positive Output Studs 6. Negative Output Studs Shown with front stud cover panel open BACK 7. DeviceNet™ Connector 8. ArcLink® (5-pin) 9. Sync Tandem Connector 10. Work Sense Lead Connector (4-pin) 11. Ethernet Connector 12. Circuit Breaker for 115V Auxiliary Output Recpetacle 13. Circuit Breaker for ArcLink® Receptacle 14. 115V/10A Auxiliary Output Receptacle

Open the catalog to page 2

iARC™ High Speed Digital Controls Coaxial Transformer Technology™ iARC™ (Intelligent Architecture for Regulation and Control) digital welding controls are more than 10 times faster than the previous generation, with 128 times more RAM, and 8 times more flash memory. It also features 100Mbps Full Duplex Ethernet to support Lincoln Electric’s Production Monitoring™ 2.2. Eliminates inefficiency and power loss. Regardless of the size (power level), a coaxial transformer has superior coupling and efficiency. This is obtained through the coaxial orientation of the primary and secondary windings....

Open the catalog to page 3

SYSTEM CONFIGURATIONS MIG Process Set-up Deluxe Adjustable Gas Regulator and Hose Kit K586-1 ArcLink® Control Cable K1543-XX Power Feed® 84 or Power Feed® 10M Wire Feeder Water-Cooled MIG Process Set-up Deluxe Adjustable Gas Regulator and Hose Kit K586-1 Cool-Arc® 55 Water Cooler K3086-1 Water Cooler Hoses (CGA to CGA) Power Feed® 84 or Power Feed® 10M Wire Feeder Water Connection Kit K590-6 ArcLink® Control Cable K1543-XX Magnum® Water-Cooled Gun Assembly

Open the catalog to page 4

SYSTEM CONFIGURATIONS Stick Process Set-up ArcLink® Control Cable K1543-XX Power Feed® 84 or Power Feed® 10M Wire Feeder Remote Output Control K857 Stick Electrode Holder, Work Clamp, Cable & Twist-Mate™ Set K2394-1 Synchronized Tandem Set-up AutoDrive® 19 Tandem To Feeder To Feeder Control Cable K2709-XX or K1785-XX ArcLink® Control Cable K1543-XX Synchronous Tandem Interface Cable included with AutoDrive® 19 Tandem ArcLink® Control Cable K1543-XX

Open the catalog to page 5

SYSTEM CONFIGURATIONS Robotic Single Arm Process Set-up AutoDrive® Wire Feeder Work Voltage Sense Lead Kit Weld Power Cable Weld Power Cable AutoDrive® 19 Controller ArcLink® Control Cable K1543-XX Analog Interface Box Set-up Control Cable K1785-XX or K2709-XX ArcLink® Control Cable K1543-XX ArcLink® Control Cable K1543-XX Analog Interface

Open the catalog to page 6

ARCLINK®/LINC-NET™ CONTROL CABLES Description WELD POWER CABLES Order Number Order Number 8 ft. (2.5 m) Without weld cable 25 ft. (7.6 m) Without weld cable 50 ft. (15.2 m) Without weld cable 100 ft.(30.4 m) Without weld cable 25 ft. (7.6 m) Heavy Duty – Without weld cable 50 ft. (15.2 m) Heavy Duty – Without weld cable 100 ft. (30.4 m) Heavy Duty – Without weld cable 14-PIN TO 14-PIN CONTROL CABLES For use with FANUC® arms having integrated cable Order Number For external dress of FANUC arm or hard automation ® Order Number

Open the catalog to page 7