STANDARD MOTOR A26 AWG LEAD WIRES12” MIN. LENGTH94 • NEMA Size 11 Mounting • Small Package • Cost Effective • Custom Windings Available (No Additional Cost) BIPOLAR Dimension “A” Max Model # Amps/Phase Torque oz-in Torque N-m Resistance Ohm/Phase Inductance mH/Phase Inertia oz-in² Weight Lbs. Number of Leads 1.26” 32 mm 211-13-01 0.67 9.2 0.06 5.6 3.4 0.05 0.24 4 211-13-02 1.30 9.2 0.06 1.7 1.1 0.05 0.24 4 1.77” 45 mm 211-18-01 0.67 13.7 0.10 7.1 4.8 0.07 0.31 4 211-18-02 1.30 13.7 0.10 1.3 0.8 0.07 0.31 4 2.01” 51.1 mm 211-20-01 0.67 16.6 0.14 8.6 6.7 0.10 0.44 4 211-20-02 1.30 16.6 0.14 1.9 1.7 0.10 0.44 4 • Please complete our application data sheet for different windings. • Power supply voltage can be any value as long as the driver output current is controlled at the motor’s rated current. • Call Lin Engineering for additional Bipolar torque curves. • Performance, use, and appearance specifications of the products listed here are subject to change without notice. • For operating temperatures, see page 94. 33 1.8° SIZE 11 DIMENSIONS (inches) SPECIFICATIONS LIN ENGINEERINGISO9001Step Motor Specialists 211 DID YOU KNOW... You can move resonance away from your operating point by changing either your input voltage, output current, inertial load on the motor, or the rotor inertia.