accessories of linear actuator and screw jack - LIM-TEC Beijing Transmission Equipment - #1 |
|
You may also be interested in
Translating screw jack, Electric cylinder, Actuator, Electric actuator, Screw jack
Text version of the page
Systematic Accessories 45accessories of linear actuator and screw jack - 56033 Systematic Accessories:Magnetic Reed Switches (FCM)The magnetic reed switches have two types: normally closed limit switch (standard)and the normally open limit switch.The magnetic ring at the end of the screw shaft moves along with the screw shaft,when the magnetic ring get close to the limit switch FCM limit switch the state of the limit switchwill be changed through the magnetic field.More reed switch can be placed along the stroke length, while the minimaldistance between the two switches is 10mm and the magnetic limit switch mustbe connected to the control circuit.Control voltage: 3-130VDC/ACCurrent: 100 mARepetitive accuracy: 0.1mmAmbient temperature: -10 -70 Anti-turn device is not available when the actuator is equipped with FCM External Limit Switches (FCE) FCE limit switch The FCE device consists of a sealed aluminum alloy box and steel rod. Adjust theposition of the rings on steel rod which fixed by screw, we can get the stop positionof actuator.Control voltage: 3-130VDC/ACCurrent: 100 mARepetitive accuracy: 0.1mmAmbient temperature: -30 -70 Note: The FCE device is recommended for linear speed lower than 30mm/s, forhigher speed it is better to use FCM or FCP or use brake. Inductive Proximity Switches (FCP) Control voltage: 10-30VDCMax output current: 200mARepetitive accuracy: 0.04mmAmbient temperature: -25 FCP fixed on the required position outside the protectivetube, and can not be adjusted (for screw jack, can beadjusted 20mm); the normally closed limit switch is thestandard. -70 Type X1 X2 SJA5 55 45 SJA10 60 45 SJA20 60 45 SJA50 70 45 SJA80 85 45 Stroke SJA100 85 45SJA200 95 45 SJA300 114 46 The position will be changed if the stroke less than 150mm,please contact with lim-tec for detail. The position will be changed if the stroke less than 150mm,please contact with lim-tec for detail. Mechanical Limit Switch (FCG) Fixed on the rear tube of the screw jack to control theextreme position of the screw shaft. Can be adjusted 20mm up and down when mounted.The configuration dimension of the limit switch: 80 -80 70 Protective class: IP67Lifetime: 10,000,000 times 22cmControl voltage: 220ACOperation current: 10AOperation speed: 0.05mm/s-0.5m/sAmbient temperature: -10 Type X1 X2 SJA5 55 45 X1X2 SJA10 60 45 SJA20 60 45 SJA50 70 45 Stroke SJA80 85 45 SJA100 85 45 SJA200 95 45 SJA300 114 46 |
|