Text version of the page

Dimensions

Basic machine with undercarriage

73602860 3000 7004200
1700 10603260 12002335461054801080
3101000 R 3900 11245

Operating weight Remarks

The operating weight includes the basic machine with HD undercarriage, 2 main winches 160 kN including wire ropes (60 m) and 11 m main boom, consisting of A–frame, pulley block, boom foot (5.5 m) and boom head (5.5 m), 12.8 t basic counterweight, 700 mm triple grouser track shoes and 50 t hook block. Total weight approx. 1. The lifting capacities stated are valid for lifting operation only (corresponding with crane classification according to F.E.M. 1.001, crane group A1).2. Crane standing on firm, horizontal ground.3. The weight of the lifting device (hoisting ropes, hook block, shackle etc.) must be deducted from the gross lifting capacity to obtain a net lifting value.4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) must be deducted to get the net lifting capacity.5. For max. wind speed please refer to lift chart in operator‘s cab or manual.6. Working radii are measured from center of swing and under load.7. The lifting capacities are valid for 360 degrees of swing.8. Calculation of stability under load is based on ISO 4305 Table 1 + 2, tipping angle 4°.9. The structures are calculated according to F.E.M. 1.001 - 1998 (EN 13001-2 / 2004). 53 t

Ground pressure

Ground bearing pressure 1.0 kg/cm
2

Equipment

Standard main boom
(No. 1310.17) max. length 47 m Fixed jib upon request Modular designed equipment for operation as crane, with dragline or clamshell. For dragline operation, a rotating fairlead is fitted into the boom foot. This minimizes the rope angle to drum, which results in lower rope wear. 2
HS 825 HD