MLD 500, MLD 300 – Multiple light beam safety devices and transceiver with integrated muting
12Pages

MLD 500, MLD 300 Multiple light beam safety devices and transceiver with integrated muting easy handling handling.

MULTIPLE LIGHT BEAM DEVICES WITH INTEGRAT COST REDUCTION POTE Access guarding, 2-, 3- and 4-beam — you decide! easy handling. SAFEGUARDING EASIER THAN EVER The multiple light beam safety devices of the MLD 300 (type 2) and MLD 500 (type 4) series are active optoelectronic personnel protective devices used at access points or dangerous locations on machines and systems. The devices are available as 2-, 3- and 4-beam transmitter-receiver systems as well as cost-efficient 2- and 3-beam transceiver systems with transmitter and passive deflecting mirror. All systems also support applications...

SAFETY ATED ENTIAL FLEXIBLE, EFFICIENT AND HIGH-PERFORMANCE The user can select from several function classes and device models within the MLD device family and, as a result, can determine the performance of his solution appropriately for the application and the respective requirements. In addition to the start / restart interlock and contactor monitoring functions, various muting modes are supported. No PC is necessary for configuration, as all functions are set via the pin assignments at the connection of the devices without additional modules. Should a device need to be exchanged, it is...

TWO PRINCIPLES — ONE PROMISE Whether transceiver or transmitter-receiver system — the MLD advantages are always included. TRANSCEIVER SYSTEM TRANSMITTER-RECEIVER SYSTEM This system consists of an active transceiver (transmitter / receiver in one housing) and a passive deflecting mirror without electrical connection. This system consists of separate transmitter and receiver (and deflecting mirror columns as necessary) for applications with large operating ranges. Economical solution with low installation effort 2- and 3-beam systems available Range from 0.5 to 8 m M12 connection technology,...

ALIGNMENT AND MOUNTING — CHILD'S PLAY This series is predestined for wide-area perimeter guarding, which is realized with deecting mirrors. easy handling. LASER ALIGNMENT AID COLORED INDICATOR It speeds up and simplifies alignment. A reflective element integrated in the receiver ensures clear visibility of the alignment laser spot, even over long distances. The deflecting mirror columns necessary for perimeter guarding are simply and quickly aligned, one after another. In addition to the muting status, the muting indicator also clearly indicates OSSD states over long distances — a clear...

EFFICIENT MUTING SOLUTIONS With its various operating modes, the sensor is ready for a wide range of muting applications. The operating mode is selected by means of wiring / with pin assignments on the connector and socket. Other tools, such as PC, software, etc., are no longer necessary. External muting controllers are not required. The overall installation of a muting application is thereby considerably simplified. MUTING AT YOUR DISCRETION HELPS REDUCE CABLING In addition to 2- and 4-sensor muting (timing controlled, sequence controlled), partial muting is also possible. In this case,...

MUTING ACCESSORIES FOR INTRALOGISTICS Pre-mounted sets support the fast installation of powerful muting solutions. Whether sequence or timing controlled muting — the MLD series is designed to simplify the setup of muting solutions as much as possible. For example, various sensor sets with pre-mounted sensors help to make installation fast and easy. L-SHAPE DESIGN T-SHAPE DESIGN Sequence controlled 2-sensor muting Sequence controlled 4-sensor muting and timing controlled 2-sensor muting This muting sensor set includes two sensors or two reflectors. The entire device is pre-mounted and...

SIMPLY CONNECT — IMMEDIATELY READY TO USE For all types of access guarding and muting applications. Access guarding with MLD 500 multiple light beam safety devices in a robotics application. Access guarding with 3-beam transceiver of the MLD 300 series in conveyor and storage systems. MLD 300 multiple light beam safety devices with deflecting mirrors for safeguarding on all sides. MLD 500 with integrated muting indicator in an AS-i safety application with sequential muting.

HERE, THE AS-i INTERFACE IS ALREADY INSIDE Integrate MLD multiple light beam safety devices in the AS-i network without coupling modules. MUTING IN THE AS-i SAFETY NETWORK The AS-i interface device models can be directly integrated into an AS-interface network. No additional coupling modules are required. In cooperation with the Leuze electronic safety monitor ASM-m, the MLD multiple light beam safety devices permit the easy construction of access guarding based on AS-i Safety at Work. The ASM-m safety monitor controls the muting sequence, whereby the muting indicator integrated in the MLD...

COMPACT SAFETY WITHOUT COMPRISE Single beam safety devices for special conditions. SINGLE BEAM SAFETY DEVICES MLD 500 SLS 46C SERIES WITH MSI-TRM MONITORING DEVICE These compact devices complement the MLD series and are used, e.g., if multiple light beam safety devices are not suitable due to the available mounting options. Whether type 4 or type 2 — the SLS 46C is part of a large product family for a wide range of applications in the areas of intralogistics, packaging systems, mounting and handling technology as well as in the wood-products, paper, and printing industries. With the SLS 46C...

OUR PROMISE TO YOU SMARTER PRODUCT USABILITY With regard to our product developments, we systematically place emphasis on the especially good usability of all devices. To this end, simple mounting and alignment are taken into account — just as the uncomplicated integrability of the sensors in existing field bus systems and easy configuration, e.g. via a web browser, are. SMARTER APPLICATION KNOW-HOW Whoever can do it all, can do nothing right. Which is why we concentrate on selected target sectors and applications. There, we are specialists and know all aspects inside out. For this purpose,...