Text version of the page

Uses s g g/cm³ - 3000 - 5000 190 - 210 ca 1.18

Epilox® T 19-69 - 40779 Data Sheet

Epilox

Epilox

®

T 19-69

Description Epilox T 19-69 is a modified liquid epoxy novolac resin. Data Viscosity at 25 °C (DIN 53 015) Epoxy Equivalent Weight (DIN 16 945) Density at 20 °C (DIN 53 217 T.4) Colour Gardner (DIN ISO 4630) mPa T 19-69 can be crosslinked by mixing with suitable curing agents, preferably Epilox - hardener H 10-69, at ambient temperature. The combination of Epilox T 19-69 and Epilox - hardener H 10-69 gives an unfilled epoxy resin system which excels by a considerably increased resistance to chemicals. It is suitable for using as mortar or as coating material in civil engineering. For this purpose it is combined with further materials for manufacturing of floors and linings of passages and dikes in such areas where dangerous substances are handled or where an adequate temporary protection against these substances in case of an upset is required. The system has a good reactivity at ambient conditions. It is of low viscosity due to its special formulation. Therefore, it can be highly filled using suitable inorganic fillers. Epilox T 19-69: 100 (parts by weight) Epilox - hardener H 10-69: 25 (parts by weight) Reactivity of the system Epilox T 19-69 (initial viscosity: 3500 mPa s) and Epilox - hardener H 10-69 (initial viscosity: 30 mPa s): LEUNA-Harze GmbH PF 4043, Bau 6619 D - 06233 Leuna, Germany Phone: +49 (0)3461-43-3094, Fax: +49 (0)3461-43-6543 E-mail: marketing.harze@leuna.de
T19-69eJan-091 of 2 Website: http://www.leuna-harze.de