Text version of the page

Uses s g mg KOH/g g/cm³ ca 30 24 ca 1400 ca 0.98

Epilox® - Hardeners TETA - 40779 Data Sheet Epilox

®

- Hardener TETA

Description Epilox - hardener TETA is a liquid, colourless to yellowish, aliphatic polyamine. Data Viscosity at 20 °C (DIN 53 015) Amine Equivalent Weight Amine Number (DIN 16 945) Density at 20 °C (DIN 53 217 T.4) mPa Epilox - hardener TETA is used as curing agent for casting, laminating and varnish resins, for adhesives and coatings at temperatures above + 15 °C. Epilox - hardener TETA may be used as substitute for Epilox - hardener DPTA due to it's similar reactivity and labelling with "C" corrosive. Packing/Storage/ Transportation - hardener TETA is supplied in hobbocks and drums. The product should be stored in closed containers at about 20 °C to protect it from moisture. Epilox Safety Requirements Epilox - hardener TETA is labelled "C" in accordance with the provisions of the Hazardous Substances Act.
The information given in these data is based on the testing methods established by Leuna-Harze GmbH and on the knowledge of the characteristics of Epilox -resins and Epilox -hardeners and is given in good faith. No liability is accepted by Leuna-Harze GmbH for any system or application in which Epilox -resins and Epilox -hardeners are utilized. LEUNA-Harze GmbH PF 4043, Bau 6619 D - 06233 Leuna, Germany Phone: +49 (0)3461-43-3094, Fax: +49 (0)3461-43-6543 E-mail: marketing.harze@leuna.de
TETAeJan-09 Website: http://www.leuna-harze.de